my "wastegate actuator relocator brackets"!! haha
hey, i haven't really posted much on here but im in the midst of a hmt setup. i thought i would post pics of my hmt wastegate actuator relocator brackets :P
i had to rotate the exhaust housing 180 so that left me with a wastegate that had nothing to bolt to. so here's what you need: zip cut tool thingy, and a big thick slab of hardened steel. http://www.rit.edu/~ltk6260/media/my-bewst/100_0485.jpg a bench ginder http://www.rit.edu/~ltk6260/media/my-bewst/100_0484.jpg and walah you've relocated your wastegate actuator: http://www.rit.edu/~ltk6260/media/my-bewst/100_0481.jpg http://www.rit.edu/~ltk6260/media/my-bewst/100_0478.jpg http://www.rit.edu/~ltk6260/media/my-bewst/100_0479.jpg http://www.rit.edu/~ltk6260/media/my-bewst/100_0482.jpg the rest of my setup: http://www.rit.edu/~ltk6260/my-bewst.html thanks for looking, -Luke |
Re:my "wastegate actuator relocator brackets"!! haha
good to see you were able to geterdone! now get it up and running, yo!
|
Re:my "wastegate actuator relocator brackets"!! haha
:P
|
Re:my "wastegate actuator relocator brackets"!! haha
looks like you got a nice setup going there. welds on the manifold look like crap though :P. i would clean it up. just a little bit 8)
|
Re:my "wastegate actuator relocator brackets"!! haha
I might be ditching the chain here in a few days... :P
|
Re:my "wastegate actuator relocator brackets"!! haha
Very good thinking! Great HMT job!
|
Re:my "wastegate actuator relocator brackets"!! haha
At least you didn't remove like half the block with an angle grinder only to pierce it, patch the hole with JB weld, ditch the whole actuator idea and just keep the puck shut with a spring.
Looks good. |
Re:my "wastegate actuator relocator brackets"!! haha
Originally Posted by BoosTedZSix
looks like you got a nice setup going there. welds on the manifold look like crap though :P. i would clean it up. just a little bit 8)
Originally Posted by junkyard racer
I might be ditching the chain here in a few days... :P
Originally Posted by CSaddict
Very good thinking! Great HMT job!
|
Re:my "wastegate actuator relocator brackets"!! haha
Originally Posted by baldur
At least you didn't remove like half the block with an angle grinder only to pierce it, patch the hole with JB weld, ditch the whole actuator idea and just keep the puck shut with a spring.
Looks good. |
Re:my "wastegate actuator relocator brackets"!! haha
haha. jb weld ownz joo :D
|
All times are GMT -5. The time now is 07:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands