My turbo mirage
#1
My turbo mirage
What's up guy?!?!?!
This is my first ever turbo. It's a '99 mirage (sohc ftw!!!). Car used to be automatic. I have put in the 4g94 (sohc lancer engine and 5 speed tranny). When I was going NA, I have put in high compression pistons in (11.0:1 compression ROSS forged pistons on stock 19mm rods).
Turbo kit is all custom fitted besides the turbo element manifold:
Garrent nissan turbocharger t25/28 (.60 intake / .80 exhaust)
38mm turbonetics wastegate
2.5 exhaust (this weekend will have 3'' side exit); no cats no mufflers
2.5 charge pipes
ebay intercooler
evo mr bov
460cc injectors, 255 fuel pump, fpr, fmu
272 crower (NA) regrind cam, stiff springs from performance springs
p&p head (gasket matched)
p&p IM (gasket matched)
controlled by emanage blue (ignition and injector harnesses)
etc...
I have dynoed 206whp and 223trq on dyno dynamics at 6.5psi; previous dyno while being NA 127whp/123trq.
Recently I just purchased a meth kit and boost controller. Going to the dyno this Friday. I want to pick up another
30-40whp, if my rods survive.
Here is my vid on 6.5psi (actually 6psi because my O2 bung has a decent crank in it) Enjoy!!!
http://www.youtube.com/watch?v=OCuNzZGU1so
This is my first ever turbo. It's a '99 mirage (sohc ftw!!!). Car used to be automatic. I have put in the 4g94 (sohc lancer engine and 5 speed tranny). When I was going NA, I have put in high compression pistons in (11.0:1 compression ROSS forged pistons on stock 19mm rods).
Turbo kit is all custom fitted besides the turbo element manifold:
Garrent nissan turbocharger t25/28 (.60 intake / .80 exhaust)
38mm turbonetics wastegate
2.5 exhaust (this weekend will have 3'' side exit); no cats no mufflers
2.5 charge pipes
ebay intercooler
evo mr bov
460cc injectors, 255 fuel pump, fpr, fmu
272 crower (NA) regrind cam, stiff springs from performance springs
p&p head (gasket matched)
p&p IM (gasket matched)
controlled by emanage blue (ignition and injector harnesses)
etc...
I have dynoed 206whp and 223trq on dyno dynamics at 6.5psi; previous dyno while being NA 127whp/123trq.
Recently I just purchased a meth kit and boost controller. Going to the dyno this Friday. I want to pick up another
30-40whp, if my rods survive.
Here is my vid on 6.5psi (actually 6psi because my O2 bung has a decent crank in it) Enjoy!!!
http://www.youtube.com/watch?v=OCuNzZGU1so