HomemadeTurbo - DIY Turbo Forum

Forced Induction Custom FI Setup Questions

my piece of ---- eg

Thread Tools
 
Search this Thread
 
Old 10-11-2009, 03:32 AM
  #1  
0.0 BAR
Thread Starter
 
one slooow EH2's Avatar
 
Join Date: Oct 2009
Posts: 5
Default my piece of ---- eg
lsv

block
b18b1

eagle rods
srp pistons
block gaurd
arp everything
acl bearings.
N1 crank pulley
ACT 6 puck clutch
p73 type R oil pump


head

p72 (GSR)
full manley valve train (built to rev to the moon)
cnc ported
cometic headgasket
oversized valves (this mod i didnt do, not sure how much over)
COMP stage 1 cams
hondata headshield intake manifold gasket (on the way)
P73 TYPE R throttle body



fuel
walbro 255
dsm 440
aem FPR


turbo
ramhorn manifold XS
t3/t4 63
HKS bov
TiAL 38mm wastegate
BLOX boost controller
SPEARCO intercooler
custom piping..............

not too much ---- is home made other then the dump tube and other chassis modifications.

swapped motor into car, stupidly w/o replacing the rear main seal (i know, im a idiot) gatta pull the tranny off and relace it then take it to get tuned.


will be tuning the motor @ 16 psi. then 1 run on race gas @ 22 psi.

slicks sitting in backyard, ready for Fontana on the 31st!

heres some teasers. havnt gotten any pics yet since we dropped the motor, been sitting at home sick

Name: somethinhgbig.jpg Views: 52 Size: 67.4 KB
Name: l_a3f0ba77d98f405eb453d18905e85779.jpg Views: 15 Size: 19.0 KB
Name: l_9d1bf4535d9745468ee383088e6d5cb3.jpg Views: 11 Size: 34.0 KB
Name: l_35f87efdebfa4c57b32fb8d1a8b0daaf.jpg Views: 15 Size: 16.9 KB
Last edited by one slooow EH2; 10-11-2009 at 03:45 AM.
one slooow EH2 is offline  
Reply
Old 10-12-2009, 01:26 PM
  #2  
0.0 BAR
 
DK_Fr0m_cc's Avatar
 
Join Date: May 2009
Posts: 25
Default
bump for another clean b series motor
DK_Fr0m_cc is offline  
Reply
Old 10-12-2009, 05:24 PM
  #3  
0.0 BAR
Thread Starter
 
one slooow EH2's Avatar
 
Join Date: Oct 2009
Posts: 5
Default
Originally Posted by DK_Fr0m_cc
bump for another clean b series motor
one slooow EH2 is offline  
Reply
Old 10-12-2009, 06:03 PM
  #4  
0.5 BAR
 
BlackTeggy90's Avatar
 
Join Date: Jun 2009
Location: New Jersey
Posts: 143
Default
looks like it should put down some decent numbers, what are you hoping for out of it? and eg looks clean
BlackTeggy90 is offline  
Reply
Old 10-13-2009, 04:29 AM
  #5  
0.0 BAR
Thread Starter
 
one slooow EH2's Avatar
 
Join Date: Oct 2009
Posts: 5
Default
Originally Posted by BlackTeggy90
looks like it should put down some decent numbers, what are you hoping for out of it? and eg looks clean


@ 22 psi im hoping to break atleast 400.

that is what i will be running the car the track.

16 psi daily driven..

16 psi will prolly get me around 335-360
one slooow EH2 is offline  
Reply
Old 10-13-2009, 12:18 PM
  #6  
0.5 BAR
 
4g63power's Avatar
 
Join Date: Jun 2009
Posts: 56
Default
22 psi out of 440s?
4g63power is offline  
Reply
Old 10-14-2009, 08:07 PM
  #7  
1.5 BAR
 
turbof22a's Avatar
 
Join Date: Jan 2006
Posts: 779
Default
Originally Posted by 4g63power
22 psi out of 440s?
22 psi for a couple of seconds maybe
turbof22a is offline  
Reply
Old 10-15-2009, 07:38 AM
  #8  
0.5 BAR
 
silver1's Avatar
 
Join Date: Jun 2009
Location: bahrain
Posts: 80
Default
you need 800+cc injectors if you want to go that high.
silver1 is offline  
Reply
Old 10-20-2009, 12:53 AM
  #9  
0.0 BAR
 
Louie's Avatar
 
Join Date: Apr 2006
Posts: 46
Default
looks nice for being a piece of ----.. mine is worse trust me. props on the project.
Louie is offline  
Reply
Old 10-22-2009, 02:09 PM
  #10  
0.0 BAR
 
extensioncordy1234's Avatar
 
Join Date: Oct 2009
Posts: 25
Default
manifolds gunna crack
extensioncordy1234 is offline  
Reply



Advanced Search
Quick Reply: my piece of ---- eg


Reply Closed Thread Share

All times are GMT -5. The time now is 09:03 PM.