|
My manifold!
|
Re:My manifold!
did you stick weld that or fluxcore it?
|
Re:My manifold!
electric flux core.
lotsa practise to :) |
Re:My manifold!
is that big pipe coming off the mani suppose to be for the external wastegate?? looks wierd! what are you planning to do with that?? ???
|
Re:My manifold!
In all honesty I don't think it's that bad for fluxcore! I'll try making a mani soon (already have the materials) but it'll come out horrible. I'll post pics anyways :)
You're my hero shortyz! |
Re:My manifold!
lol yeah its for WG.
|
Re:My manifold!
does it work
|
Re:My manifold!
Looks good shortyz. HMT manifolds usually turn out to be the best manifolds.
|
Re:My manifold!
looks like you welded your plyers lol
|
Re:My manifold!
yeah they work for my ground :)
|
Re:My manifold!
dude, why did you chop off the log I had on there, lol.. looks about the same quality ;)
j/k |
Re:My manifold!
is that the first manifold that you've welded? i just bought a welder and am going to try my hand at making some mani's. how long did that take? you have any pointers? that ---- does look good as hell for flux core, i hope i can get some to come out looking that good!
|
Re:My manifold!
jeff cause i pressure tested yours and it leaked in like 40 spots! believe me i was going to
rofl. ;D yeah when welding a mani MAX setting. make sure your wire feed isnt to fast, itll sound like bacon if its perfect, also groove the joint your making and start in the middle then puddle it out to the sides. gl :P |
Re:My manifold!
Originally Posted by shortyz
jeff cause i pressure tested yours and it leaked in like 40 spots! believe me i was going to
rofl. ;D yeah when welding a mani MAX setting. make sure your wire feed isnt to fast, itll sound like bacon if its perfect, also groove the joint your making and start in the middle then puddle it out to the sides. gl :P |
Re:My manifold!
looks good! I like the wastegate placement too. Dead center. Just wondering, if you were to make more, are u able to angle that flange out toward the front bumper to keep an internal wastegate?
|
Re:My manifold!
yah..
|
Re:My manifold!
whenyou start to make your manifold, dont forget to interrupt your welds. make them short, dont put too much heat for too long into the metal. it weakens it. and also little ribs added to pipe-flange junctions can increase durability on the joint. just my little bit of 2 cents :P
|
Re:My manifold!
Justin, if the welder is on the small side, I have an 80 amp wire feed (100 Amp peak) that I used to make my log manifold, wouldn't it help to keep the heat for better penetration? The manual actually recommends pre-heating for 1/4" and thicker. I actually tried to keep the welds going as long as I could. It looked similar to shortyz, then I skimmed over the hole thing with a tungsten carbide bit in my die grinder... and smothered it with about 4 coats of white ceramic paint, though it might help show any leaks ;D
This is for a rear wheel drive toyota 4age. http://members.rogers.com/85ae86/images/mani_n_dump.jpg Neil |
Re:My manifold!
depdnds on the duty cycle.
|
| All times are GMT -5. The time now is 06:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands