My HX35 failset 3800 fiero build.
 

using a HX35w off a 99+ (aka the fabled 58lb/m super hx35). 3800 series2 fiero swap, stock motor, stock trans, stock everything. I already went 12.2 with a stock (lightly pulley) supercharger and a tiny bit of dry nitrous.

Oil line in picture is now kevlar (wasnt leaking with rubber, just changed it for piece of mind). Intercooler setup is in the works, frozenboost are BITCHES to the max.... Ended up ordering a ebay cooler (really nice) and it just got here, in time for it to sit in the box while I am painting the car.

Current setup with 15psi and no intercooler is working nice on pump gas.... intercooler and 20+psi is going to be sickening.... I also usually run racegas often, and there is a nitrous setup still on here. If my $40 trans holds up, I might be able to slide into a high 10 at 125-128mph.

http://images.pneumakinesis.multiply...nmid=118597708

https://www.dsmtuners.com/forums/att...ressor-map.jpg

http://i78.photobucket.com/albums/j1...S2400001-4.jpg
Attachment 13417
Attachment 13418
Attachment 13419
Attachment 13420
Attachment 13421
Attachment 13422
Attachment 13423
Attachment 13424
Attachment 13425
Attachment 13426
Attachment 13427
Attachment 13428
Attachment 13429
Attachment 13430
Attachment 13431
Attachment 13432
http://i78.photobucket.com/albums/j1...n/th_race5.jpg

Re: My HX35 failset 3800 fiero build.
 

I like the 3800's, but man your choice in chassis is funky. I ASSume that's a blower intake setup with the blower's rotors removed?

I remember doing a water pump on a 2.8 Fiero and laughing bitterly about the zero clearances. Does the 3.8 help with that in any way?

Can we get more pics?

Re: My HX35 failset 3800 fiero build.
 

Also, what was the 60' on that run? You are trapping what most of the riceboy Honduh owners who frequent this site trap when they knock off a 12.8-12.9... and I did't hear any real wheelspin. :P

Re: My HX35 failset 3800 fiero build.
 

what are you doing, dh? following me around? :P

Please clean up that engine bay! Yikes.


I can't speak for the 3800 swap, but my DOHC 3.4 swap fits way better than the stock 2.8. It's a bigger motor but it takes 10 minutes to change the water pump, 60 seconds to change the belt (not joking!), a couple minutes for the O2 sensor, 20 min for the alternator.. it's just wonderful.

Fieros optimally do ~1.8 60-ft on normal street tires. 1.6 on drag radials. No joke. No traction problems with 1600 lbs static weight sitting over your rear tires, and more to come from the weight transfer at launch.

Re: My HX35 failset 3800 fiero build.
 

You just said DOHC 3.4. :(

Re: My HX35 failset 3800 fiero build.
 

So?

Re: My HX35 failset 3800 fiero build.
 

I hate those things.

Re: My HX35 failset 3800 fiero build.
 

my 60' was trash, 1.84.... I shoulda been deep into the 1.7's or the 1.6.... but I was a bit scared of breaking it, so I didnt push it any more.

The supercharger is hogged out with no rotors/belts or anything.

Re: My HX35 failset 3800 fiero build.
 

Looks tits, when you going to use the other 38lb/m of air the holset can provide though ;D

Re: My HX35 failset 3800 fiero build.
 

That's nice. ::)