rprznt

well nogs, i built a turbo gas turbine engine a couple years ago

i put a trailer load of chopped wood and bbq fuel in it, then 5 gal of diesel splashed in, left to sit overnight, then in the morning, IGNITION.

100# gas bottle modified for combustion chamber, plenty of 2" pipe, and some HMT arc welder love
turbo is a .50 / .70 garrett t4 w/ twin scroll ex housing, free from truck wreckers yard....


------- BEAST! It ran hard at WOT with boost gauge pegged for 10 mins, then as it ran out of wood, fuel pump died and seized turbo............

pics

the setup



see carb spring boost controller, boost guage and throttle body on intake



5" pvc oil tank, oil pump lol



close up



overall



dont ---- with the arc welder, nignog!
haha i was only 16 when i made it.



enjoy!

NIGn0g

---- yeah, nice work! But where are the vids?

Gold DA9

hmm....

rprznt

no vids, i am a failure

E-b0la

Where are you pumping your fuel from?

MerkurColin

Badass.

A friend of mine built a gas turbine out of a T3 from a Merkur:






Same problem with oiling... after it spun up and ran for a few seconds, the bearing seized and the shaft twisted off. Pretty impressive to watch.

Colin

seerex

Damn thats sick

Gold DA9

what are the reasons to build one of these? Besides the cool factor.

rprznt

it runs on burning wood / diesel mix. compressed air blow into the bottom of the chamber, and through a bbq grate holding the wood, air makes wood burn, super hot gases drive turbine. rinse and repeat.

goldda9, i had a spare turbo, and thought ---- it, why not? ------- loud, lucky i live on a farm