Re: my hmt kit comming together...
Originally Posted by SinisterCRX
Your stock TB is more than fine for what that turbo will get ya. Jeez o man, lol
GL with everything ;) well yes but a larger throttle body and a correct intake manifold will equal alot more throttle response and overall just more power 2 people in this thread have 12 sec d15b's both on small turbos ones that most people cant get to run 13's on both run port work both modified intake manifolds shocking no. Good luck with that kit |
Re: my hmt kit comming together...
porting the head on a single can get you good gain but it must be done right
|
Re: my hmt kit comming together...
Originally Posted by chris
well yes but a larger throttle body and a correct intake manifold will equal alot more throttle response and overall just more power 2 people in this thread have 12 sec d15b's both on small turbos ones that most people cant get to run 13's on both run port work both modified intake manifolds shocking no. Good luck with that kit word! |
Re: my hmt kit comming together...
don't think the port work is going to happen for abit.....shyt.....this paycheck i'm picking up an intercooler an just migging my charge pipes here at work with our amazing 110 miller special biotch!
Then i'll order my obd2-1 harness from Xeno an i'll be good to go........i'll take some pix when i start raping my bitch....i mean my car....i'm still driving it to work....why u ask.....it's got a FULL TANK OF GAS shyt.....definately take vids when Josh gives this slut some tunage...... oh an n e one got n e hook ups for shocks an struts....my car feels like a fukkin bounce house right now... |
Re: my hmt kit comming together...
Neat setup, I like the budget builds :y
|
Re: my hmt kit comming together...
hey ------ u shudda told me u were working on a hmt kit!!
|
Re: my hmt kit comming together...
vj11 turbos arent the greatest for top end, but boy do they spool fast. on my mx6, i had just a boost controller and i was hitting 15psi in 5th gear by 2.5K rpm's :o
a few mx6 guys have hit 12s on those turbos with just bolt ons and slicks, so you shouldnt have any problem getting 13s with a good launch. anything more than 15 psi daily, that turbo probably wont last too long. good project, and good luck haha btw, i got a stock mx6 intercooler fs, plenty efficient for 15psi ;D |
Re: my hmt kit comming together...
8 Attachment(s)
ok so i finally had a few hours at work to fit and mount my intercooler that i picked up from WTF
Attachment 25050 I wanted to mount my intercooler before saturday because thats when i'm taking this bitch into work and ripping into it hard.....should have been a quick install but turned into a headache after what i saw with the core support. I yanked the bumber off and found that the guy that owned it before me actually had hit something pretty bad and the spot welds from the factory were pulled right out the the core support bracket on the passenger side was just hanging....so after some hammering and welding....me an my buddy got that bitch straight Buddy kev layin down some mig action Attachment 25051 Attachment 25052 This is the passenger side.....he just welded the whole seem around the support.....factory had 3 spot welds......uber reinforcement now nogs! Attachment 25053 And since he was laying some welds already we just had him reinforce the driver side to....u never know... Attachment 25054 So the intercooler had two tabs welded on for whatever reason......i decided to flip the bitch upside down so it fits flush withing my bumber.....to do this i had to cut off the 2 tabs on the bottom Attachment 25055 and here it is mount-the red arrow is pointing to where the support was broken and the work we did to fix it: Attachment 25056 As with any intercooler install....i had to hack my bumber a bit.....but still fits pretty flush... Attachment 25057 I'm ordering my t-fitting from tuner toys tomarrow along with some charge piping from donald so hopefully i'll have everything by saturday to get this bitch boosted... |
Re: my hmt kit comming together...
Are you going to have enough room to fit pipe below onto the intercooler? It looks good it's just the inlets look about flush with the bottom line of the vehicle.
|
Re: my hmt kit comming together...
sweet keep the thread updated
|
All times are GMT -5. The time now is 02:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands