HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   My first turbo Project *PICS* Parts list (https://www.homemadeturbo.com/forced-induction-7/my-first-turbo-project-%2Apics%2A-parts-list-38833/)

david_jones001 05-02-2005 04:48 PM

My first turbo Project *PICS* Parts list
 
8 Attachment(s)
Alright, this will be my first time boostin and throwing a turbo kit on a car. I made sure that i spent my money wisley and got all the things i need and shopped around
Here is the type of car and setup

94 civic cx hatchback
d16y8 swap with brand new
water pump
timing belt
Clutch
D16y8 tranny as well

As far as the turbo shizzle:
T3 Garrett Turbo from Down2Turbo Reman.
Internally gated to 10psi
SSautoCrap Manifold Braced and Re-enforced welds, (I KNOW I KNOW< this is only until i can get my other manifold
New Jonnyracecar 5 Inch Intercooler
Stealthmode 2.5 Intercooler pipe kit
Stealthmode Oil line kit
Stealthmode Oil restrictor
Tuner Toys 450cc New Injectors
Turbo XS RFL BOV
Vision Oil Catch Can
Autometer Air/Fuel Gauge and Boost Gauge
Uberdata Ecu
Dataloggin Cable
Willem Dual Chip Burner
2.5 Downpipe with o2 bung welded in
2.5 8 inch Flexpipe
2.5 Test pipe
2.5 Piping to muffler
Zex copper plugs
2.5 Intake to turbo with Motorcycle ait filter
Oil pan all welded for turbo feed

now for the pic's i promised u fuckbags: NOW these were taking with a camera phone so i dont have to tell you about the high quaily of these pics :P
Turbo mounted on manifold
Attachment 38218
Another shot of the turbo
Attachment 38219
Pipe with RFL BOV on it and a nice coat of paint
Attachment 38220
Sexy JRC Intercooler, I think i jizzed on this when i got it
Attachment 38221
Vision Oil Catch Can
Attachment 38222
A/F and Boost Gauges in the Pod Pillar
Attachment 38223
Part of the downpipe with Flexpipe and test pipe, Not welded yet until on car
Attachment 38224
Tuner Toys 450cc Injectors
Attachment 38225

So there ya go. By the end of the week i will throw it on. I have a basemap from Projegtek, And then i will get it Street tuned. I cant wait to see how it comes out and i will try to take pics of the install and take some after pics as well. Thanks for all your help when i needed it here and thanks to the people that helped me get here
Big thanks go to
Stealthmode Performance
Craig at tuner toys
Transemister or something like that lol
Xcreon
Projegtek
And anyone else that has helped me throught the way







BLACKSI 05-03-2005 01:33 AM

Re: My first turbo Project *PICS* Parts list
 
everything except of course the manifold looks good. but could you make the pics smaller ::)

whiterice 05-03-2005 01:38 AM

Re: My first turbo Project *PICS* Parts list
 
great parts list!
show what yer car looks like.
stock cx fuel pump?

95RedEX 05-03-2005 08:43 AM

Re: My first turbo Project *PICS* Parts list
 
Might want to get an extra chip :-X

I won't make that mistake again. >:D

david_jones001 05-03-2005 09:17 AM

Re: My first turbo Project *PICS* Parts list
 
yea i got a extra chip, i have one with launch controll and one without, stock cx fuel pump, ill post pics of the ride later, and sorry about the pics lol, they just came out that way haha


All times are GMT -5. The time now is 01:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands