My B20a Turbo Build
My B20a is not the 88-91 lude it came in JDM 84-87 lude and 85-89 Accord Si JDM.This my first toubo porject i am going to try to get it right the first timeThe B20a has stock bottom end and head for now.
Mod List 1.LudeSpeed Manifold 2.Costom APR Head Bolts 3.Costom Web Cams Intake.........Exhaust valve lift........ .420......... .430 Duration:........230............237 Duration@050 : 200.........205 Lobe Center.... 110...........112 Intake opens -10 Before TDC Exhaust opens 34.5 Before BDC Intake Closes 30 After After BDC EXhaust Closes -9.5 After TDC 4. KKK K27 Turbo TURBO SPEC: INLET 2.75" OUTLET 2.75" BEARING TYPE WET FLOAT BEARINGS/ oil cool OIL INLET 1/8 NPT MAX PSI CAPACITY 35PSI Compressor Wheel : .63 A/R , IND: 49.15mm , Exd 80.84mm , Trim: 36.9 Turbiner Wheel : .87 A/R , Ind: 67.16mm , Exd: 78.85mm , Trim: 78.4mm FLANGE TYPE T3 FLANGE DOWN PIPE FLANGE TYPE 6bolt 5. Adapter Plate to run GSR Trany 6.OBD-1 converion Pr4 Ecu and B18A/B distributor 7.Stage 2 6puck clutch and plate 8.Precision 550cc injectors 9.B16 intake ported to 68mm 10. 68mm Throttle body 11. Two F22 cam gears 12.35mm 8psi waste gate Tial knock off :l 13.MSD A6 http://memimage.cardomain.net/member...7_277_full.jpg http://memimage.cardomain.net/member...7_290_full.jpg http://memimage.cardomain.net/member...7_294_full.jpg http://memimage.cardomain.net/member...7_313_full.jpg http://memimage.cardomain.net/member...7_341_full.jpg http://memimage.cardomain.net/member...7_279_full.jpg http://memimage.cardomain.net/member...7_255_full.jpg http://memimage.cardomain.net/member...7_303_full.jpg http://memimage.cardomain.net/member...7_257_full.jpg And here my Accord that it's going in to it a nice sleeper ;D http://memimage.cardomain.net/member...7_201_full.jpg and this is the non turbo B20a i have in there right now http://memimage.cardomain.net/member...7_319_full.jpg |
Re: My B20a Turbo Build
Here some Kitty porn for you ;D
http://memimage.cardomain.net/member...7_264_full.jpg http://memimage.cardomain.net/member...7_268_full.jpg |
Re: My B20a Turbo Build
|
Re: My B20a Turbo Build
when are you planing on making boost .87 ar jesus
|
Re: My B20a Turbo Build
Damn sweet build :y. It seem like you really did you home work. BTW Got more pic's?
|
Re: My B20a Turbo Build
Originally Posted by bitchasscracker
when are you planing on making boost .87 ar jesus
|
Re: My B20a Turbo Build
Nice build!
Those are ------ rare, that was my dream engine swap when I had my 3G accord. |
Re: My B20a Turbo Build
Originally Posted by jagojon3
Nice build!
Those are ------ rare, that was my dream engine swap when I had my 3G accord. |
Re: My B20a Turbo Build
nice build
|
Re: My B20a Turbo Build
Originally Posted by TwoLoudnproud
i am hoping 3300 3500RPM's i wont know for sure untel in and running ??? This guy has the same turbo that i going to use http://videos.streetfire.net/hottest...969A262AD1.htm
|
Re: My B20a Turbo Build
Originally Posted by TwoLoudnproud
i am hoping 3300 3500RPM's i wont know for sure untel in and running ??? This guy has the same turbo that i going to use http://videos.streetfire.net/hottest...969A262AD1.htm
|
Re: My B20a Turbo Build
Holy ---- that thing flies :y
That launch was tits |
Re: My B20a Turbo Build
Originally Posted by TwoLoudnproud
i am hoping 3300 3500RPM's i wont know for sure untel in and running ??? This guy has the same turbo that i going to use http://videos.streetfire.net/hottest...969A262AD1.htm
i just dont see you hitting boost at 3300 you may start but i'm thinking full boost at 5k ish |
Re: My B20a Turbo Build
5. Adapter Plate to run GSR Trany
why would u need a adaptor plate to runa gsr trans? b series is b series :1 |
Re: My B20a Turbo Build
Originally Posted by humbert
5. Adapter Plate to run GSR Trany
why would u need a adaptor plate to runa gsr trans? b series is b series :1 Ever looked at a b20a...I think not. Not the same as the newer B series motors at all. Look under the hood of an 86-89 accord some day to see how the motor sits...then youŽll be like, oh yeah, I am stupid. Great project! I had an 89 accord lx-i a while back...solid car, got me into liking Hondas. Too bad I didnt throw a HMT kit on it, it would have been so much cooler. I remember you from 3geez.com from a while back, great to hear you still are working on an old accord. Good luck! |
Re: My B20a Turbo Build
1 Attachment(s)
Originally Posted by humbert
5. Adapter Plate to run GSR Trany
why would u need a adaptor plate to runa gsr trans? b series is b series :1 Attachment 24046 USDM GSR Trany http://i3.ebayimg.com/07/i/000/86/7d/4a8e_1.JPG |
Re: My B20a Turbo Build
Originally Posted by danronian
Great project! I had an 89 accord lx-i a while back...solid car, got me into liking Hondas. Too bad I didnt throw a HMT kit on it, it would have been so much cooler. I remember you from 3geez.com from a while back, great to hear you still are working on an old accord. Good luck! |
Re: My B20a Turbo Build
|
Re: My B20a Turbo Build
Go here important infohttp://www.youtube.com/watch?search=...&v=-Ayw9NdlBlA
|
Re: My B20a Turbo Build
Originally Posted by humbert
why would u need a adaptor plate to runa gsr trans? b series is b series :1
|
Re: My B20a Turbo Build
|
Re: My B20a Turbo Build
|
Re: My B20a Turbo Build
hey it's just like the holset hanging off my B20A, kewl, if there is anything similar about that turbo to a H1C between all my head and intake work I see boost build-up at 3k and 3.8k I am at full spool 10 lbs
nice to see another b20a |
Re: My B20a Turbo Build
Originally Posted by Reyke
hey it's just like the holset hanging off my B20A, kewl, if there is anything similar about that turbo to a H1C between all my head and intake work I see boost build-up at 3k and 3.8k I am at full spool 10 lbs
nice to see another b20a |
Re: My B20a Turbo Build
|
All times are GMT -5. The time now is 11:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands