My 1st setup, turbo 86 accord
 

This is my first turbo setup, I'm running 8psi on the stock BS(A20) block. I've converted the car from pre OBD to OBD1 and am running a chipped P75 with the ostrich and Crome pro. I'm running a 92-93 accord distributor with a custom adapter, made from a stock efi distributor and a 1/4" thick piece of steel, and the ignitor is replaced with a solid state circuit to trigger the msd. I'm no longer have A/c, it hasn't worked in two years since I was too lazy to fill it. I kept the power steering though, it required me to reroute the high pressure line and to move the reservoir a little. The engine bay still needs to be straightened/cleaned up some, but it runs good and is almost tuned.

T3 turbo (turbine .48 a/r, 0.68 trim)(compressor 0.42 a/r, 0.62 trim)
custom manifold
SS autochrome wastegate w/8psi spring (tial replacement already ordered from LSD :y)
Audi Bosch BOV
intercooler 25"x6"x3"
2.5" charge pipes
3" down pipe
full 3" exhaust
3" magnaflow muffler

Close up of turbo, manifold, and wastegate during installation.
http://i110.photobucket.com/albums/n...h_100_2257.jpg
Shot during fitment of the the intercooler. You can also see where I cut half the bumper off so the intercooler would fit, I welded in a piece of 1/8" thick 1.5" square tube to make up for the piece i cut out.
http://i110.photobucket.com/albums/n...h_100_2248.jpg
Couple shots of the engine bay. (Don't mind the missing tranny I was doing the clutch that day)
http://i110.photobucket.com/albums/n...h_100_2378.jpg
http://i110.photobucket.com/albums/n...h_100_2377.jpg
http://i110.photobucket.com/albums/n...h_100_2381.jpg
http://i110.photobucket.com/albums/n...h_100_2380.jpg
http://i110.photobucket.com/albums/n...h_100_2379.jpg
A few shots of the intercooler with the bumper mounted.
http://i110.photobucket.com/albums/n...h_100_2357.jpg
http://i110.photobucket.com/albums/n...h_100_2353.jpg
http://i110.photobucket.com/albums/n...h_100_2350.jpg
The Exhaust.
http://i110.photobucket.com/albums/n...h_100_2382.jpg
http://i110.photobucket.com/albums/n...h_100_2394.jpg
Tuning setup with laptop mount, had to modify the mounts since it was from a crown vic.
http://i110.photobucket.com/albums/n...h_100_2389.jpg
http://i110.photobucket.com/albums/n...h_100_2388.jpg
http://i110.photobucket.com/albums/n...h_100_2386.jpg




More pics here
http://s110.photobucket.com/albums/n...icrw165/turbo/

Re: My 1st setup, turbo 86 accord
 

that ---- is ------- sick... bout time someone posts a solid setup again... good job.

Re: My 1st setup, turbo 86 accord
 

Thanks, I didn't even ask one noob question either :o, just read everything I could and found the answers to the questions since they were already out there somewhere,

Re: My 1st setup, turbo 86 accord
 

holy awesome. That is bad-ass. Get some vids up son!

Re: My 1st setup, turbo 86 accord
 

If only they were all like that..... ;)

Re: My 1st setup, turbo 86 accord
 

But then there would be no one to flame.

Re: My 1st setup, turbo 86 accord
 

thats some really nice work! Good ----!

Re: My 1st setup, turbo 86 accord
 

you get the newb of the year award for 07, awesome ---- dude.

4 gauge pillar pod!!!!!!! :o

Re: My 1st setup, turbo 86 accord
 

Well i figured if i had to make one to fit my car why not do something different/better.

Re: My 1st setup, turbo 86 accord
 

I miss my A20 hatch, your setup is ------- awesome though!

Did you convert to EFI a while ago or for the turbo setup? or did you just swap a BS block into an EFI car

Re: My 1st setup, turbo 86 accord
 

Its been about two years since I converted my car from carb to efi, I did the OBD1 swap about 5-6 months ago. I've also got the suspension fully work over. I plan on getting the car painted sometime soon and then i will start building my spare motor for boost. I really just need to order some custom pistons to go with my b18 eagle h-beam rods, since the post office lost the other ones i bought somewhere between Canada and here.

Re: My 1st setup, turbo 86 accord
 

Nice build man.

Re: My 1st setup, turbo 86 accord
 

wow. thats a nice setup. major props.

Re: My 1st setup, turbo 86 accord
 

I like that laptop mount >:D
Overall looks very good ,nice work dude

Re: My 1st setup, turbo 86 accord
 

One of these days I'll actually finish my 86 prelude w/ its A20. Be scared, I have an accordcentral.com manifold :o

Nice setup. ;D

Re: My 1st setup, turbo 86 accord
 

Thanks for the props guys.

I have to hold off on the tuning for now, I had to send my LC-1 in to be fixed my analog outputs only put out 5v :'(. So I'm gonna have to drive it a little easy for the next week or so. The car is decently tuned but not quite as good as I want it.

sick dude

thanks for bunmping a 2 year old thred just so you can view the porn section