Mustang Single turbo build.
4 Attachment(s)
Started out with just a table full of goodies ive been collecting for awhile now.
https://www.homemadeturbo.com/attach...ine=1357519153 Going under the trans to Y into a single 2.5 all the way to the turbo. https://www.homemadeturbo.com/attach...ine=1357519153 Put in a flexpipe coming off of the passenger side manifold. https://www.homemadeturbo.com/attach...ine=1357519153 https://www.homemadeturbo.com/attach...ine=1357519153 |
4 Attachment(s)
tried to keep it as tight as possible without being to close to worry about those pesky speedbumps
https://www.homemadeturbo.com/attach...ine=1357519402 https://www.homemadeturbo.com/attach...ine=1357519402 Finished up to the y https://www.homemadeturbo.com/attach...ine=1357519402 https://www.homemadeturbo.com/attach...ine=1357519402 |
3 Attachment(s)
From looking at some of the other builds and replys it seems that going through the a-arm is the easiest and best bet.
https://www.homemadeturbo.com/attach...ine=1357519839 Hung the turbo in place to get an idea of its finally resting place and finish the up pipe. https://www.homemadeturbo.com/attach...ine=1357519839 Also put in another flex and had to weld on a bend to clear the stock fan with new larger 3cow radiator. https://www.homemadeturbo.com/attach...ine=1357519839 |
6 Attachment(s)
Turbo bracket made out of some spare metal lying around, can now get started on downpipe and FMIC
https://www.homemadeturbo.com/attach...ine=1357527550 https://www.homemadeturbo.com/attach...ine=1357527550 Again through the A-arms https://www.homemadeturbo.com/attach...ine=1357527550 https://www.homemadeturbo.com/attach...ine=1357527550 3in Downpipe into 2.5in Y to fit all stock catbacks. https://www.homemadeturbo.com/attach...ine=1357527550 https://www.homemadeturbo.com/attach...ine=1357527550 |
awesome build. if the pipes hang to low they sell some really nice oval tubing that would give you a bit more ground clearance. waiting for more pics and info. its good to see an amercian car turbo build. im getting sick of the jap car builds......
|
Originally Posted by busa4
(Post 1310461)
awesome build. if the pipes hang to low they sell some really nice oval tubing that would give you a bit more ground clearance. waiting for more pics and info. its good to see an amercian car turbo build. im getting sick of the jap car builds......
|
5 Attachment(s)
Wrapped about every bit of the hot side that i could
https://www.homemadeturbo.com/attach...ine=1357744520 https://www.homemadeturbo.com/attach...ine=1357744520 https://www.homemadeturbo.com/attach...ine=1357744520 https://www.homemadeturbo.com/attach...ine=1357744520 https://www.homemadeturbo.com/attach...ine=1357744520 |
7 Attachment(s)
https://www.homemadeturbo.com/attach...ine=1357745272
Now time for the charge piping. Set up the intercooler first https://www.homemadeturbo.com/attach...ine=1357745272 Then could get the turn just right down to it.And also installed a 50mm BOV https://www.homemadeturbo.com/attach...ine=1357745272 Also got a new 44mm wastegate and dump tube to install now too. https://www.homemadeturbo.com/attach...ine=1357745272 https://www.homemadeturbo.com/attach...ine=1357745272 Air and Fuel is kept right with a blow-thru protube and matched with a set of 60lb injectors. https://www.homemadeturbo.com/attach...ine=1357745272 Finally finished off with a single pipe to the TB/Plenum combo. https://www.homemadeturbo.com/attach...ine=1357745272 |
List of parts used for any future references.Hope to get some videos and #s up soon, is on 13lbs right now.
All hot side pipes are Mild steel and from Columbia River Mandrel Bending,never had any problems with them and will also make a package for you if you so need it.(also have all the order numbers if anyone was doing another mustang like this) @ Tube Bending & Fabrication - Columbia River Mandrel Bending All charge piping and Intercooler are 3" kit from CXracing @ CXRacing Exhaust wrap came off of an ebay store called Thermal Solutions and so far has been working great. @ eBay My World - thermalsolutions The 50mm BOV, 44mm Wastegate and dump tube came from a local guy with the ebay store relentless_performance. Bov sounds awesome and been able to get into a few pulls with the car and the wastegate is right on point and for the price im extremely happy. @ eBay My World - relentless_performance |
what did you do for tuning?
|
All times are GMT -5. The time now is 03:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands