Murkur Turbo. (.48/ .60)
 

Can you use the return oil part of the turbo for the feed? or is it made to only flow one way?

Re: Murkur Turbo. (.48/ .60)
 

Won't work.

Re: Murkur Turbo. (.48/ .60)
 

the oil feed is located on the bottom and the return is on top. can it work like that or does the feed have to be on top?

Re: Murkur Turbo. (.48/ .60)
 

The feed has to be the feed or dont listen to me and ignore the fact that it'll bottle neck/back up oil flow and ---- yer seals. :-*

Re: Murkur Turbo. (.48/ .60)
 

you know you can rotate it so the feed is at the bottom, right?

Re: Murkur Turbo. (.48/ .60)
 

https://www.homemadeturbo.com/forum/...?topic=13035.0


JP

Re: Murkur Turbo. (.48/ .60)
 

Shh guys that's secret info I sell on eBay for $10

Re: Murkur Turbo. (.48/ .60)
 

Clock that bitch, nignog!

Re: Murkur Turbo. (.48/ .60)
 

nevermind, im a nignog :1

Re: Murkur Turbo. (.48/ .60)
 

no ----, i thought the same ---- back in 99 then realized the center section could be rotated

Re: Murkur Turbo. (.48/ .60)
 

for longevity on the bearings and seals, its best to let gravity do its job and keep the feed on the top staight up, and the drain on the bottom staright down. but thats a given ???