HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   more boost (https://www.homemadeturbo.com/forced-induction-7/more-boost-29751/)

9tray turbo 11-10-2004 02:15 PM

more boost
 
i want to raise my boost to ten pounds, its 8 right now, should i keep the settings from the faq or richen it up some more in the higher rpms
ihi rhbs (8psi)
vafc set to faq specs
y7/y8
would it be safe to run 10 psi
give me an whp estimate at 10 psi

turboboy 11-10-2004 02:17 PM

Re:more boost
 
running 450s right?...what exactly are your settings

9tray turbo 11-10-2004 02:18 PM

Re:more boost
 
ya 450's
the settings are the same in the fuel management faq

turboboy 11-10-2004 03:38 PM

Re:more boost
 
should be fine imo...in reality you should always use a wb for tuning to check

9tray turbo 11-10-2004 03:49 PM

Re:more boost
 
how much whp do u think I will produce at 10psi

mahcivic 11-10-2004 04:00 PM

Re:more boost
 
4 cuase you have 4 wheels duh! come on man, thats an impossible question for us to answer.

robs99si 11-10-2004 05:10 PM

Re:more boost
 
this is a good way to tune your car on the cheap. Using this method, you read the voltage off the stock o2 sensor with a digital voltmeter $18. at radio shack. i used this method to check my current settings. i hooled up the voltmeter to the green or white cable of cars' o2 sensor for the positive cable on the volt meter and the negative cable to a chassis ground.
AIR/FUEL RATIO GAUGE READING/volts

RATIO
14.7/1 0.50 volts:
14.6/1 0.60
14.5/1 0.70
14.2/1 0.80
13.5/1 0.85
13.2/1 0.90
13.0/1 0.92
12.5/1 0.94
12.0/1 0.95
this is the link i copied it from:
http://www.zeitronix.com/questions/O2questions.htm


All times are GMT -5. The time now is 07:24 PM.


© 2024 MH Sub I, LLC dba Internet Brands