megaaquirt question
ok so im thinking about buying one of the kits unassembled (assembly is not a problem)
what does the kit come with and what do you need to go out and buy in order for it to work. also what is it replacing in your stock setup. they make it sound like youre replacing the whole ECU. not the case right? |
Re: megaaquirt question
Why would you buy a kit that doesnt have everything you
need :S |
Re: megaaquirt question
The Megasquirt is supposed to be your entire engine control unit. I think some mundane tasks can be left to the stock ECU, like if it controls your transmission and/or dashboard, but I've got no idea what'd be involved if that were the case. It's supposed to be a complete standalone management system.
It comes with everything you need to build the ECU, but you have to supply sensors etc that are compatible with the MS. Sometimes stock will work, sometimes not. Also,
Originally Posted by alx954
Why would you buy a kit that doesnt have everything you
need :S |
Re: megaaquirt question
ms adds in a few extra bits to change resistors and some small stuff for sensors, but megasquirt is more based on speed density than mass airflow
|
Re: megaaquirt question
diyautotune.com
they are the major supplier for most everyone...keep and eye out supposidly they are coming out with a new version of the v3 board which comes to you mostly assembled and you just have to add the stuff to work for you application ignition wise |
Re: megaaquirt question
get the prebuilt loom with it. and a stim kit if you want to do it right. other than that, you need to read a lot on the ms forums/sites before you go much further.
you'll also need wideband. aem and innovate are the two to go for. innovate has more for the $$ |
Re: megaaquirt question
ill sell you mine with a stim/case, wiring harness plug and a foot of harness, $150 shipped
|
Re: megaaquirt question
It would probably help if you mentioned what MS you have. MegaSquirt I, II, what board revision, etc. Would you sell the harness separately? Very interested, but I already have a MSII v3.0.
|
Re: megaaquirt question
Originally Posted by c0mpl3x
ill sell you mine with a stim/case, wiring harness plug and a foot of harness, $150 shipped
thanks everyone for the replies. i have been reading on the forums and no one had as basic a question as me. hahah. i was just looking at all the cabling and stuff that you would have to buy to hook up a laptop or the stim. looking at the diagram they made of what you need it seems like you need so much more than what their kit comes with. |
Re: megaaquirt question
jon is that the ms unit you burned up? I would buy it but I doubt it works :l
|
All times are GMT -5. The time now is 04:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands