|
Re: Measuring your turbo for custom oil lines
Originally Posted by Stealthmode
Block fitting to block - 13 ft lbs.
Fittings into turbo and block fitting - 45ish ft lbs (if you're asking) Hose ends to fittings - finger tight + 1 "face" (the hose end has six "faces" if you will) Drain flange bolts - about 45 ft lbs Barb to drain flange - about 45 ft lbs 45 ft lbs should be percieved as tight, but not axle nut tight. :P |
Re: Measuring your turbo for custom oil lines
Originally Posted by 88dx
how did you come up with these torque specs? Just wonder because 45ft LBS seems like a lot?
|
Re: Measuring your turbo for custom oil lines
Originally Posted by 88dx
how did you come up with these torque specs? Just wonder because 45ft LBS seems like a lot?
Originally Posted by Stealthmode
45 ft lbs should be percieved as tight, but not axle nut tight. :P |
Re: Measuring your turbo for custom oil lines
I did my set up just like that with the exeption of the oil pan tap, I welded a bung and I didn't have those bomb-ass gloves.
|
Re: Measuring your turbo for custom oil lines
Bomb ass gloves not included.
(Cray, put this on the site) |
Re: Measuring your turbo for custom oil lines
Originally Posted by Stealthmode
Bomb ass gloves not included.
(Cray, put this on the site) |
Re: Measuring your turbo for custom oil lines
Originally Posted by Stealthmode
(Cray, put this on the site)
http://www.---------------------------/oil-install.shtml |
Re: Measuring your turbo for custom oil lines
Originally Posted by Cray91
|
Re: Measuring your turbo for custom oil lines
Originally Posted by ryan89crx
spelled basic wrong FYI
|
Re: Measuring your turbo for custom oil lines
Originally Posted by Stealthmode
(Cray, put this on the site)
Originally Posted by Cray91
Feb 28, on the site. :P
6 months and 9 days later, my free webmaster pulls it off. :6 |
| All times are GMT -5. The time now is 05:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands