mbc question. Please help!
 

Hey yall I just made a manual boost controller- the one they explain how to make in the faq~! Well to hook it up all you do is t into the bov vac source on one side of the mbc and for the other side do you have to t into the vac source were your actuaor hooks to the turbo or do you just run the vac straight up to the actuator, and then look the vac from the turbo to the actuator?- if you did that you wouldnt have to hook up any vac to the turbo were it use to go to the actuator. Please help just wanna make sure so I dont ---- anything up and hit like 15 psi! lol Sorry for haveing to be so damn confusing and I hope you understand what im saying! Nick

Re:mbc question. Please help!
 

you can just put it in where the vac source was for the wastegate originally, no need to draw from the bov unless you want to

Re:mbc question. Please help!
 

well see look how he says to hook it up at the bottom of the link the picture/digram http://www.geocities.com/chmwatson/FAQs/mbc.html

Re:mbc question. Please help!
 

how would yall recommend hooking it up?

Re:mbc question. Please help!
 

Just put it between the turbo and the actuator.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:mbc question. Please help!
 

I just had it t'd to my bov and the actuator and it was running like a champ. But prolly gonna do wut u said dr. boost! Would I just instead of t'ing into the bov hook that side up to the turbo? Ha just making sure! lol

Re:mbc question. Please help!
 

Yeah, but you can leave it if you already have it hooked up. It won't hurt anything. I just think it would be cleaner instead of having a vac line running all over the engine bay.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote