map issue
 

ok so out of no where code 3(map) and 7(TB) poped up. so i disconnected the map and throttle body clips and put em back on. code 7 went away but code 3 didnt. took out the map clip again and put it back on. the code finally went away. but the next day it came back. wtf. did the clip thing again but this time it didnt go away. hooked up my map directly without using checks. still dosent go. checked all the wiring from the vafc and ---- and they seem to be fine. so wtf can be the problem?

Re: map issue
 

a map sensor jus dosent die suddenly. or does it?

Re: map issue
 

and if there is faulty wiring then how can i find the spot where its disconnected or something

Re: map issue
 

if you have an ohm meter you should test the resistence. it should be in your repair manual, then you can rule out a fuct sensor

Re: map issue
 

aite so what are the 2 wires that i should check the resistence in? and whats a fuct sensor?

Re: map issue
 

FUCKED

Re: map issue
 

oh ma bad. anyways how to check the resistence?i got no manual

Re: map issue
 

anyone else?

Re: map issue
 

what are you running? check valves? missing link? chipped ecu?

Re: map issue
 

5 checks and a vafc

Re: map issue
 

the car dies in high second and third. throttle goes loose and seems like the car is off. u let go off teh throttle then it comes back to normal.

Re: map issue
 

you need to get a manual, everyone should have one

Re: map issue
 

what plugs are you running and what gap? sounds like you could be blowing out spark.....also I would suggest a chipped ecu and a tune very shortly

Re: map issue
 

tru. ive got bosch 2 pin plugs with the gap they came with. soon im going to get a external coil. about the chiping. man i gave a shot at it but it wasnt a sucess. car never started. cl never went away. soon going to try it again with a stock bin. ill get to chiping wen i get my burner. neways can u guys also giv me the details of a burner that i should get. like what kb and stuff. ne ways the chiping and the plugs thing could cause the car to die in 3rd but y am i still getting that code 3?

Re: map issue
 

bosch plugs?? 2 pin? first, why arent you running ngks? second, you should be a step colder than stock with a gap between .28-.30 depending on what works best for your setup. you dont need an external coil.....just send your ecu to xeno and for like $45 he can chip it for you and include a basemap to get your car started. its pretty straight forward man......you're making it pretty hard on yourself currently