Making my own turbo kit

Reply Subscribe

Thread Tools

Search this Thread

05-05-2003, 01:26 PM

cerx

0.0 BAR

Thread Starter

Join Date: May 2003

Posts: 1

Making my own turbo kit

Does anyone know how to make the 1st gen. eclipse turbo setup work on a f22a1-a6. I have heard it could be done but i'm not sure what parts i need to get.IM somewhat sure of how to install it because i helped my friend boost his gsr. If anyone could help that would be appreciated.

05-05-2003, 02:22 PM

Rolla1990

1.0 BAR

Join Date: Jan 2003

Posts: 494

Re:Making my own turbo kit

https://www.homemadeturbo.com/forum/...;threadid=3921

Here's a huge list of extremely helpful topics.

05-05-2003, 02:27 PM

DOHCZCEF9

1.0 BAR

Join Date: Mar 2003

Posts: 305

Re:Making my own turbo kit

Well you really can't do what D series can where you take a stock manifold and use a adpater plate. The " Cheap " way I've seen H22's and F22's is find a T3 for sale somewhere and buy a custom turbo manifold. www.thedropshop.com I think has them for sale for B,D,H,F series motors or look around you'll see them somewhere. They may not look as nice as a DRAG, REV HARD , or GREDDY manifold but it gets the job done. Then just find a decent I/C( I have seen Accords and Lude's use the Starion )and buy some piping and a BOV and Management. I really don't know much about F and H series motors but from what I've seen you can't really use some of the many different parts you can use with D and B series. If I remember correctly there's pic.'s and a write up somewhere an old post about a prelude HMT set-up that may give you ideas if you can find the post.

05-06-2003, 10:03 PM

scarecrowX

0.5 BAR

Join Date: Apr 2003

Posts: 188

Re:Making my own turbo kit

i could be wrong, but i've read that the dsm exhaust manifold will fit those engines with a couple head bolt holes relocated/elongated. if it's true, it'd be WAYYY cheaper than buying an manifold.. i think dsm's have more room in front of the engine though...