HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - lsvtec turbo? (https://www.homemadeturbo.com/forced-induction-7/lsvtec-turbo-74237/)

goldhatch94

Feb 20, 2007 12:04 AM

lsvtec turbo?

what kind pistions do i run ls or gsr or b16?

facetuned

Feb 20, 2007 01:33 AM

Re: lsvtec turbo?

depends.

ososlohatch

Feb 20, 2007 01:46 AM

Re: lsvtec turbo?

try one of each, why dont you ask josh :-*

goldhatch94

Feb 20, 2007 07:45 AM

Re: lsvtec turbo?

Quote:

Originally Posted by ososlohatch

try one of each, why dont you ask josh :-*

::) are a so funny!!!!

boosted_b16

Feb 20, 2007 01:12 PM

Re: lsvtec turbo?

use ls pistons, keep the c/r down so you can run like 10 psi of boost and it'll be easier to tune it, gsr or b16 pistons will work but your starting with a lot higher c/r which means lower boost levels and more of a pain to tune...

Xgenturbo

Feb 20, 2007 03:35 PM

Re: lsvtec turbo?

http://zealautowerks.com/

LS bottom end with B16A head B16A connecting rods with B16A Pistons will get you 8.96:1 CR and you could run a crap load of boost on that setup.

Now the question is, what does it take to mate a B16 rod to an LS crank? or is it direct fit?

I'd also like to know because In the future I can swap in my forged B16 rods with some forged pistons in to an LS and have one hell of a turbo engine.

All times are GMT -5. The time now is 05:48 AM.