Looking for an Exhaust Housing for a TD-04H turbo
 

I bought a Greddy turbo kit for my Miata and ended up wrecking it 3 weeks after I got it. Three years later I have most of the kit plus a new better Miata, the Manifold, Downpipe, the secondary fuel regualator and the turbo, minus the exhaust housing that goes on the turbo... Does anyone have one or know where to get one. Greddy is selling one for about $450 but I was hoping to get one a little cheaper than that. Also I need to get the bolts and gaskets for the turbo... Let me know if you have any ideas. A better way to get a hold of me is eunos67@hotmail.com

Re: Looking for an Exhaust Housing for a TD-04H turbo
 

There are a couple of guys on here who can make one, i.e. hotrex and csaddict.
I can probably make one for you too, just depends on what you want.

edit - I totally thought you were talking about a manifold :1

Re: Looking for an Exhaust Housing for a TD-04H turbo
 

This is eunos again. After some extensive web searching..... I'm curous. Does any one know if a TD04H off a volvo 850 Station Wagon will work on my turbo. Once again I have a TD04H Greddy kit for my Mazda Miata....If it will work then the whole turbo is just $140

Re: Looking for an Exhaust Housing for a TD-04H turbo
 

The only housing that *might* fit could be the TD04h from the Automatic trans'd 1st generation DSM's (eclipse/talon/laser). It uses the Tbolt/ring style mounting for the center section to the exhaust housing.

https://www.homemadeturbo.com/tech_p...rbo_td04_P.jpg

however you'll need to rig up some custom internal gate setup, because I'm the greddy actuator isnt going to bolt up perfectly.