looking for a DP gasket
i need one for my T3 internal wastegate turbo. it's the 3 bolt pattern.
the only place i've found one is on cheapturbos.com/phoenixturbo.com but i cant seem to get a reply back from them about shipping and such. is there any other place which sells them? thanks, Jonathan P. |
Re: looking for a DP gasket
Is this a flat surface flange to flange or is it cupped? I don't even use a gasket on mine but its similar to a 5 bolt(mind is 7 bolt), I just used copper spray gasket maker ha.. no leaks..
|
Re: looking for a DP gasket
after about a 30 minutes of searching i figured the best bet is to use that copper stuff.
thanks, JP |
Re: looking for a DP gasket
yea..make your own
|
Re: looking for a DP gasket
where can u get this copper ---- at?
|
Re: looking for a DP gasket
any auto parts store...but ive never used any gasket on a turbo to dp flange
|
Re: looking for a DP gasket
hahaha dude, thats the worst flange ever in terms of leaks. most auto parts stores sell reinforced exhaust gasket material that you can buy by the square inch. I had such problems with my gaskets leaking, bolts coming loose, stripping the housing, that I just welded that Flange right to the wastegate housing. now, all i have to do to remove my downpipe is undo the wastegate and unbolt the five big fat strong bolts for the wastegate housing. No leaks, cause thers a bigger 'contact patch'. Works perfect. It's what I'd recomend you do if you have any problems at all with leaks and such.
|
Re: looking for a DP gasket
Those shitty composite gaskets dont work.... their a quick fix, but after a few month they burn out and it starts leaking,
Your best bet is to make one yourself with some sheet metal, trace the flange, cut out the center with a hole saw, drill the bolt holes out, then with a rubber mallet flaten your new gasket on an anvil or other flat surface. That is probably your best solution, unless you want to keep replacing those cheap vatozone gaskets. |
Re: looking for a DP gasket
You can get brass sheet metal at a RC hobby shop, this is what I use, it comes in various thicknesses, this stuff is cheap too, cut out your gasket and use copper spray in it and I guarantee it will never leak.
ps: A good thing about this stuff is that copper is a soft metal, so it will mould to any imperfections in the metal flanges that you may not see. |
Re: looking for a DP gasket
I"ve had copper gaskets melt on me.
and if you want a cheap gasket material, just use a old liscence plate. but i'd seriously recomend just welding that flange to the wastegate housing. |
All times are GMT -5. The time now is 07:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands