leaving 450cc on stock LS, SAFE???
10-25-2004, 01:39 AM
#1
1.0 BAR
Thread Starter
Join Date: Jul 2004
Location: 206/WA
Posts: 597
leaving 450cc on stock LS, SAFE???
I about to take my turbo off my car, just wanna know do i have to change injectors back to stock.
I lost my old stock ones, and dont wanna buy em or waste time trying to find them. I running UBERDATA.
Should I do some kind of bin modifications? or can i run stock ecu with 450s?
I lost my old stock ones, and dont wanna buy em or waste time trying to find them. I running UBERDATA.
Should I do some kind of bin modifications? or can i run stock ecu with 450s?
10-25-2004, 01:50 AM
#3
1.0 BAR
Thread Starter
Join Date: Jul 2004
Location: 206/WA
Posts: 597
Re:leaving 450cc on stock LS, SAFE???
Originally Posted by Cray91
You will have to adjust the boost efficiency stuff. But lots of ppl run larger injectors with uber N/A.
Do you know or does anyone know what i should put it at? Stock 120??
lower or higher?
10-25-2004, 05:29 AM
#5
1.0 BAR
Thread Starter
Join Date: Jul 2004
Location: 206/WA
Posts: 597
Re:leaving 450cc on stock LS, SAFE???
Originally Posted by Cray91
Yeah 120 is the stock setting in uber.
Yeah i know that, but do i change my boost settings back to 120 stock setting?
what number should i put it at?
120 is stock, I know that. Do i put it at this or any other number? b/c for the turbo i out about 110-118
10-25-2004, 11:12 AM
#7
3.0 BAR
Join Date: Mar 2003
Posts: 4,217
Re:leaving 450cc on stock LS, SAFE???
wait a minute! if you put it to 120, on 450cc, it will not be stock, you will be running 120%of 450cc... so you need to go to a lower number. if you plan to keep the 450cc in.. like say put it at 55% if you change injectors to stock, put it at 120,, correct me if I'm wrong please.
10-25-2004, 11:18 AM
#8
3.0 BAR
Join Date: Apr 2003
Posts: 11,058
Re:leaving 450cc on stock LS, SAFE???
you guys are retarded, the fuel multipliers automatically scale the 450's down while in vacuum, the boost effeciency and ign. retard only affect the boost portions of the map, so if there is no boost, then it's not affecting the maps. you can leave it as is 
if anything, you can reburn the stock .bin with the 450's and not touch anything under the 'boost' tab, if you don't hit 'apply' in the boost tab, you'll notice all the cell's after '0' are zeroed out, b/c it hasn't filled in the boost portions of the map. but why go through teh trouble, run it as is.
if anything, you can reburn the stock .bin with the 450's and not touch anything under the 'boost' tab, if you don't hit 'apply' in the boost tab, you'll notice all the cell's after '0' are zeroed out, b/c it hasn't filled in the boost portions of the map. but why go through teh trouble, run it as is.
10-25-2004, 12:13 PM
#10
3.0 BAR
Join Date: Dec 2003
Posts: 8,155
Re:leaving 450cc on stock LS, SAFE???
Originally Posted by projekteg
you guys are retarded, the fuel multipliers automatically scale the 450's down while in vacuum, the boost effeciency and ign. retard only affect the boost portions of the map, so if there is no boost, then it's not affecting the maps. you can leave it as is if anything, you can reburn the stock .bin with the 450's and not touch anything under the 'boost' tab, if you don't hit 'apply' in the boost tab, you'll notice all the cell's after '0' are zeroed out, b/c it hasn't filled in the boost portions of the map. but why go through teh trouble, run it as is.
if anything, you can reburn the stock .bin with the 450's and not touch anything under the 'boost' tab, if you don't hit 'apply' in the boost tab, you'll notice all the cell's after '0' are zeroed out, b/c it hasn't filled in the boost portions of the map. but why go through teh trouble, run it as is.
Thread
Thread Starter
Forum
Replies
Last Post
