HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Lag time??? (https://www.homemadeturbo.com/forced-induction-7/lag-time-4488/)

Smokey 05-02-2003 08:52 AM

Lag time???
 
I've got a b18b1, and i'm gonna be using a SVO T3, .60/.63 with the stock internal wastegate..I was just wondering what your guess' may be at where i may get full boost?? I'm hoping no more than 3500-4000, i will be running a 3" Downpipe and exhaust with 2 resonators, and 2 1/4 mandrel bent charge pipes..I know alot of people are gonna say every setup is different, but i'm just looking for a ballpark idea of what people are getting with similar setups...Let me know where you get full boost and what motor/turbo you are running..

turboboy 05-02-2003 11:02 AM

Re:Lag time???
 
you should be fine....i have a 48/60 t3 on a d16y7 and i get full boost (7psi) at 4500, yours should be lower

robs99si 05-02-2003 09:47 PM

Re:Lag time???
 
ima run a dsm t25 w/7 psi on a 99si b16a, when will i reach 7psi? what rpm ;D

HMT-Admin 05-02-2003 09:51 PM

Re:Lag time???
 

Originally Posted by robs99si
ima run a dsm t25 w/7 psi on a 99si b16a, when will i reach 7psi? what rpm ;D

Probably at idle :-X

leed 05-03-2003 03:49 AM

Re:Lag time???
 
Smokey, with a roll on in 2nd gear you'll probably get 10psi by 4000ish. A bit sooner in 3rd...etc...

yungtuner 05-06-2003 09:03 AM

Re:Lag time???
 
ok, what about a 14b on a d16z6, im lookin at 10 psi, just a ballpark at when i will be at full boost.

ZexRex 05-06-2003 10:46 PM

Re:Lag time???
 
t4 1.42exh on a 1.5 carb motor in a small cargo van ballpark to hit 40 psi from rolling start in reverse.


All times are GMT -5. The time now is 03:42 AM.


© 2024 MH Sub I, LLC dba Internet Brands