Forced Induction Custom FI Setup Questions

kkk ko3 on D16

Thread Tools
 
Search this Thread
 
Old Jan 27, 2006 | 03:15 AM
  #11  
bozo's Avatar
0.5 BAR
 
Joined: Oct 2005
Posts: 119
Default Re: kkk ko3 on D16

I also have k03 and I am puting it on my D15Z6 Euro Civic. I am wery interested to see how it will work. I am planing to start working on it in a few weeks. I am stil colectig parts.
Old Jan 27, 2006 | 08:25 AM
  #12  
zex_cool's Avatar
Thread Starter
1.5 BAR
 
Joined: Dec 2005
Posts: 1,129
Default Re: kkk ko3 on D16

i got all my stuff, i just need some time to put it all in. ill post pictures when i start on it.
Old Jan 27, 2006 | 09:31 AM
  #13  
bozo's Avatar
0.5 BAR
 
Joined: Oct 2005
Posts: 119
Default Re: kkk ko3 on D16

I can not find injectors for my aplication. It is shity here in Croatia because there is no DSM-s like in the USA.
I was wondering if I could use prelude h22a injectors but i am not shure if they are 310cc or 345cc.
USDM should be 345 and JDM 310. Wich one were in the Euro Preludas?
Old Jan 27, 2006 | 10:41 AM
  #14  
jinxy's Avatar
0.0 BAR
 
Joined: Feb 2005
Posts: 0
Default Re: kkk ko3 on D16

you can sell the turbo for more than a good used t3 is worth.
Old Jan 27, 2006 | 10:44 AM
  #15  
jinxy's Avatar
0.0 BAR
 
Joined: Feb 2005
Posts: 0
Default Re: kkk ko3 on D16

and use MR2 injectors. they are 550's. if you can find them, celica all trac injectors will also work as they are the same thing. or they should work.
Old Jan 27, 2006 | 10:59 AM
  #16  
BoostedBSeries's Avatar
3.0 BAR
 
Joined: Feb 2003
Posts: 1,625
Default Re: kkk ko3 on D16

ill tell you right now, thats a FUN little turbo. its a burnout master. spools INSTANTLY. like 1800 rpm u will see 10 psi. we did one at my old shop on a car, custom tiny *** manifold, front mount, 390s. all through a d15b7. the car was a blast to drive. instant boost in any gear. you wont make much power on it, its just way to small, but you WILL have fun with it. get a 2.5bar map sensor, yer gonna want to run at least 13psi to have any fun with it. we ran 11ish and in 1st and 2nd gear, it would just roast the tires right off the car. ZERO top end though. you will find yourself shifting at 5 grand and the car being as fast as it would have been if u shifted at redline.


Brett
Old Jan 27, 2006 | 04:37 PM
  #17  
bozo's Avatar
0.5 BAR
 
Joined: Oct 2005
Posts: 119
Default Re: kkk ko3 on D16

What do you do after 5 grand to 7 grand where I shift my car.
Uberdata suports up to 11psi so how can I run 13psi
Old Jan 27, 2006 | 09:39 PM
  #18  
sohcpwr's Avatar
1.5 BAR
 
Joined: Sep 2004
Posts: 1,460
Default Re: kkk ko3 on D16

ifi your map sensor reading goes higher than the sensor, uber holds the tune in the 11.03psi column. So make it a little rich and check to make sure with a wideband. I just bought my 2.5bar map, but was running 17 on the stock map
Old Jan 27, 2006 | 10:16 PM
  #19  
zex_cool's Avatar
Thread Starter
1.5 BAR
 
Joined: Dec 2005
Posts: 1,129
Default Re: kkk ko3 on D16

ok now, ill be using 450cc and a crome base map from xenoron am I good as far a fuel/timing goes ? I also have a dsm fuel pump, should I change the stock one ?

Old Jan 28, 2006 | 10:01 AM
  #20  
93hatchdx's Avatar
1.0 BAR
 
Joined: Jul 2004
Posts: 226
Default Re: kkk ko3 on D16

im from idaho and theres definatly more people than idaho speed center that can tune :1. what car do u drive? i have a fully built z6/y8 head in a blue 92 hatch.



All times are GMT -5. The time now is 06:35 PM.