Just got myself a GT23V forB16a
 

I just got a Garrett GT23V from a friend of mine. its a bit bigger then CT20 bigger then NIssan V27 (which im using in my B16). the turbo is brand new with no shaft play. here are the details
Garrett 0.42a/r M53 (written on compressor side)
AL0010
GT23V
and it says made is france
this turbo also has a benz label on it.which means that its off of a Merc. has a internal wastegate but a little different type.

im thinking about putting it in my B16.......what do u guys think?
Does anyonehere have any ideaabout this turbo?":?? any flowmaps???? how much HP is it good for??
Ill be posting up the pics in a day or two hopefully (i need to geta bluetooth device to do that)

Letme know ur comments plez

Re: Just got myself a GT23V forB16a
 

ok the images are attached u can see Toyota CT20 along with Nissan V27(used in my B16) andalso the new garrett GT23V . hope this gives u some idea.

let meknow plez
http://memimage.cardomain.net/member...02_71_full.jpg
http://memimage.cardomain.net/member...02_70_full.jpg
http://memimage.cardomain.net/member...02_69_full.jpg
http://memimage.cardomain.net/member...02_68_full.jpg
http://memimage.cardomain.net/member...02_67_full.jpg
http://memimage.cardomain.net/member...02_66_full.jpg

Re: Just got myself a GT23V forB16a
 

Pull off the compressor and exhaust housings, then measure the small & large diameters of both wheels.

http://majesticturbo.com/compresson-maps.html

^^^ has info to match that roughly to a compressor, and give a very rough idea of what it can do. I know jack about the turbo, but with the wheel sizes and maybe AR sizes, I can give you an idea.

Re: Just got myself a GT23V forB16a
 

Ok!! illopen it uptonight and letu know theoutcome. until then any ideas??? :D

is it any good for a B16??

Re: Just got myself a GT23V forB16a
 

very small...good for a b16 up to about... 5000rpm's

lol

Re: Just got myself a GT23V forB16a
 

replace ur blender blade with that turbos compressor wheel so you can say you used it for something

Re: Just got myself a GT23V forB16a
 

Does it means that its a piece of junk???
No use of it in a B16??? :O

though its a bit bigger as compared to which im using currently. Am i using a very small one???? should i dump it off immediatly???
tellmetellme

Re: Just got myself a GT23V forB16a
 

ct20 is weaksauce. ----, even the ct26 is weaksauce on a b16. Using anything other than a t3/t4 or a holset is futile. Unless doing 60' burnouts in first and second are your idea of sweet traction.

Re: Just got myself a GT23V forB16a
 

Yeh way too small , don't even think about using it your car will be slower , guaranteed.
t3/t4 minimum mate , b16a 's turn animal with big turbo on vtec 8) 8)

Re: Just got myself a GT23V forB16a
 

Does it actually in real means that my car would be very slow???
I lost to a CTR with I/H/E and Chipped Hondata on 7/8psi of boost. Was it because of small turbo?? will i be able to beat the same CTR on the same boost by running a bigger turbo???

Can i use KKK k26 instead of my current and xpect better performance???
let me know thanks :)