Just double checking about my oil return
 

O.K. I've read the FAQ section and saw the pic. the gy just recently posted but I just want to make sure since most of the stuff from honda-tech in the FAQ is words not pic.'s and if there is a pic. it's not to clear. When putting the oil return flange ( I'm using a oil return flange off a 1.8T GTi looks just like the greddy ) You want to place it right above the baffle in the oil pan. I'm just guessing the plate in the oil pan is called a baffle but any way you want to put the flange right above that correct. There a good pic. on here but I don't have the softwear to up load pic.'s but the guy put it in the far right corner ( if you're looking at the pan ). I just want to make sure since I only have one oil pan. ;D Any clear pic.'s would also help me out. Thanks

Re:Just double checking about my oil return
 

dude, just put it like 1 inch down from the top or something. the only thing that matters is that it is above your oil fill line so that it can drain, if it is below that it will get backed up. just put it as close to the top as you can.