HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   jdm b18c itr crx with 5 psi...need help with tuning (https://www.homemadeturbo.com/forced-induction-7/jdm-b18c-itr-crx-5-psi-need-help-tuning-56166/)

mikelane5 02-18-2006 02:46 PM

jdm b18c itr crx with 5 psi...need help with tuning
 
Alright...i have a '88 hatch with a '97 jdm b18c itr. It has a t3/t4 turbo with a turbonetics evolution wastegate, msd btm-6 set at 0.7 degrees of retard per pound of boost with external coil and cap pushing 5 psi. I have everthing installed and running ok so far, but i am extremely worried about detonation!!!! does anyone know a good setting for the msd ignition timing or is what im using ok....every once in awhile when i am pulling hard the car with backfire with a little hesitation before kicking in vtec. Other than that it runs good. Any type of input would be greatly appreciated because this setup is to expensive for me to be guessing at.. :-\http://C:\Documents and Settings\mik...2\DSCN0104.JPG

tr4cti0n.i55ues 02-18-2006 02:57 PM

Re: jdm b18c itr crx with 5 psi...need help with tuning
 
stop being a ----- and up the boost

mikelane5 02-18-2006 03:03 PM

Re: jdm b18c itr crx with 5 psi...need help with tuning
 
trying to make sure everything is running good first....this bitch has 11.1 pistons, so it's not but so turbo friendly

hotrex 02-18-2006 03:05 PM

Re: jdm b18c itr crx with 5 psi...need help with tuning
 
u nrrd some real management

mikelane5 02-18-2006 03:11 PM

Re: jdm b18c itr crx with 5 psi...need help with tuning
 
getting hondata s300 with obd1 p72 ecu, and 9.1 pistons so i can push 12 psi if my tax money will ever get here. just wondering if anyone knew a good timing setting until then

N1ghtM0nkey 02-18-2006 03:32 PM

Re: jdm b18c itr crx with 5 psi...need help with tuning
 
---- hondata, use Uberdata or Crome, it's free - all you have to do is chip an ECU.

You'll be lucky if it doesn't blow up prior to getting your money, so I wouldn't rape it too much. Also, don't stop at 12psi, if you're doing internals you might as well use them to their potential and run like 15psi.

RJwaggs 02-18-2006 04:29 PM

Re: jdm b18c itr crx with 5 psi...need help with tuning
 
I think nightmonkey is right, with boost at 11:1, you will be lucky to have your engine long enough to change anything. I recommend changing your CR before you do anything else, therefor when testing your new tune, you won't blow your ---- up.

vtechf150-c5 02-21-2006 12:25 PM

Re: jdm b18c itr crx with 5 psi...need help with tuning
 
lol dude. it would b a shame wasting ur jdm itr motor man. u should give it to me be4 it goes into the scrap pile. get uber or crome asap. ur gonna b sorry. ok man take our advise

chris

MAJORAHOLE 02-21-2006 12:39 PM

Re: jdm b18c itr crx with 5 psi...need help with tuning
 
i thought 1 degree retard was the safe timing. better safe than sorry. :y

TurbodEG 02-21-2006 12:44 PM

Re: jdm b18c itr crx with 5 psi...need help with tuning
 
my stock itr lasted on 7psi neptuned.


All times are GMT -5. The time now is 09:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands