internal wastegate question

Reply Subscribe

Thread Tools

Search this Thread

11-17-2005, 01:41 PM

EG-prince

0.0 BAR

Thread Starter

Join Date: Oct 2005

Posts: 0

internal wastegate question

New to turbo, don't hate me. I have a greddy 18g internally wastegated turbo (i know, greddy pos right? well i got it for REALLY cheap) but anyway, How much should the wastegate flapper move when I push/pull on the wastegate arm? The arm itself is threaded with a nut on it-- what does tightening the nut do (it was loose when i got it) Thanks in advance, and sorry for the noob question

11-17-2005, 02:06 PM

95RedEX

1.5 BAR

Join Date: Aug 2004

Posts: 949

Re: internal wastegate question

If your actuator is mounted to the turbo/body, you should thread the arm so that the flapper is somewhat tight. You shouldn't really be able to open the flapper by hand.

11-17-2005, 02:08 PM

HMTguy

Guest

Posts: n/a

Re: internal wastegate question

Exactly. Just make sure that the flapper is closed by default. If you are able to open it, it should require quite a bit of pulling. If it just pulls right open easily and you have it adjusted right, then the WG is shot.