internal wastegate adj?
i turned it in but i still got no more boost?
|
Re:internal wastegate adj?
Get a boost controller. Then you can turn up the boost as much as you want.
|
Re:internal wastegate adj?
if you made the wastegate arm shorter, the wastegate is goingo remain open alot or a little depending on how much you shortenned it. if you make it longer, it'll put more tension on the wastegate spring (inside the wastegate) and increase the boost. so you turned it in meaning you shortened the arm, lengthen the arm. a little at a time and keep your eye on the boost gauge, make sure the wastegate has a good boost vacuume source like the pcv valve or the charcoal emissions filter.
|
Re:internal wastegate adj?
if i lenghten the wastegate arm it will hold the flapper valve open and not boost wont it? i always though making it shorted increased it?
|
Re:internal wastegate adj?
yea you're right nightsack i got it backwards, i'm kida dislexic i think.lol and the add isn't helping.
|
Re:internal wastegate adj?
Take a pin and poke a couple holes in the actuator line. Poke more until you reach your desired boost. ;)
|
Re:internal wastegate adj?
oh now that is a nice little perforated way to boost control. Nice. 8)
|
Re:internal wastegate adj?
that was me i was on natesacks account and didnt know it, but anyways poking holes in the vaccum line? really
|
All times are GMT -5. The time now is 11:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands