HomemadeTurbo - DIY Turbo Forum - internal wastegate

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - internal wastegate (https://www.homemadeturbo.com/forced-induction-7/internal-wastegate-13279/)

Shanksta

12-19-2003 10:47 AM

internal wastegate

I am sure this is going to be the easiest question some of you have ever answered but i need to know so i need to know what the internal wastegate on the 2g eclispes (t-25)is set at. any help will be appriciated thanks.

tranceminister

12-19-2003 04:12 PM

Re:internal wastegate

I am not too familiar with the DSM turbo's, but I beleive they are set pretty high. Your best bet would be to hook up a bicycle pump or some type of pressure pump with a guage on it and get the number when it starts to open the wastegate.

turboboy

12-19-2003 09:32 PM

Re:internal wastegate

pretty sure its 8-9 psi

bounce

12-23-2003 01:40 PM

Re:internal wastegate

to lower de boost
http://zoogle.zapto.org/wastegate.jpg

high c

12-25-2003 02:14 PM

Re:internal wastegate

but that makes the turbo spoll slowwwwwwwwww :-X

HMT-Admin

12-26-2003 09:28 AM

Re:internal wastegate

Quote:

Originally Posted by high c

but that makes the turbo spoll slowwwwwwwwww :-X

Very true.. when cracking the wastegate slightly open it makes spool times slow, even on the dinkey t25. 8psi is what the stock DSM wastegate is set at.

All times are GMT -5. The time now is 06:46 PM.