Installed all my ----, some ?'s
installed all my ----,
Open Downpipe, sounds loud, but my rev limiter is set at 3.5, now my BOV is not blowing off loud like it should , its a RFL is that cuase when i rev it, i only get it to 3.5, i havent driven it yet, just turned it on and reved it some. Also looks like some oil i can see just below the flang for the oil inlet, but i cant see where its leaking from. Im gonna have to wait till i get my Slim fan installed to drive it and see whats going on with the BOV, i have it T d into between the fuel pressure regulator and the intake manifold
im running
t3 garrett turbo
SSautocrap mani braced and rein welds
internally gated
2.5 charge pipes
JRC 5 inch FMIC
Stealthmode Oil kit
Correct 450cc injectors
Uberdata Ecu
RFL BOV
2.5 Downpipe
Oil catch can
Open Downpipe, sounds loud, but my rev limiter is set at 3.5, now my BOV is not blowing off loud like it should , its a RFL is that cuase when i rev it, i only get it to 3.5, i havent driven it yet, just turned it on and reved it some. Also looks like some oil i can see just below the flang for the oil inlet, but i cant see where its leaking from. Im gonna have to wait till i get my Slim fan installed to drive it and see whats going on with the BOV, i have it T d into between the fuel pressure regulator and the intake manifold
im running
t3 garrett turbo
SSautocrap mani braced and rein welds
internally gated
2.5 charge pipes
JRC 5 inch FMIC
Stealthmode Oil kit
Correct 450cc injectors
Uberdata Ecu
RFL BOV
2.5 Downpipe
Oil catch can
oh yea, but i did put my hand over the bov and when i rev it to 3.5 it does open and some air comes out, i guess its not boosted fully so its not blowing off like it should i have a t3 48 whatever, internally gated 10 psi,
im a little scared like a bitch lol, this is the first thing i have ever done or seen turboed that wasnt made turboed. so im worried when i rev it, i keep thinking its the engine making the noise, but its the open downpipe, loud as ----, didnt think it whould be that loud, smells funny too
It need a load on theengine to make much noise. Most BOV can't chuck at idle, unless the turbo is a little ihi or t25.
Things will smell a little funny due to paint, oil and other stuff burner of your parts and it may smell a litlle funny until you tune.
Things will smell a little funny due to paint, oil and other stuff burner of your parts and it may smell a litlle funny until you tune.
why is your rev limiter 3500, or you have launch control on? yeah, unless you rev the ****, like near red line, out of it, your bov won't usually open from a rev. also, like mentioned, it takes a while to burn off all the oil/paint/etc. that is on everything from the install and what not. drive it and let us know how it does.
Originally Posted by projekteg
why is your rev limiter 3500, or you have launch control on? yeah, unless you rev the ****, like near red line,
Thread
Thread Starter
Forum
Replies
Last Post
bigmike92363
Turbo Parts For Sale
85
Apr 9, 2007 03:58 PM



