Install of a Turbo
 

is there any directions of installing a turbo setup? like where oil lines go and where vacum lines go...stupid question to some of you...but helpful to others (like me) i have never delt wit turbo so im a n00b at it..i've always been n/a but imma do turbo and try it out for awhile..any help would VERY be apriciate it

my setup will be a bmc manifold, t25, 3inch dp, some kinda BOV, 3inch exhaust, and johnny race car FMI, fmu, stock injectors, and a 255 walboro..i have pretty much all the lines and hoses i think..just thought i'd let you all know in case u need to.. and it will be on a b16

Re: Install of a Turbo
 

Goodmorning , man all the help u'll ever need is right here on HMT 'yo !!!
I can supply you with this it might help you out a bit
Good luck with install

http://forums.cjb.net/ziptieturbo-about7.html

Re: Install of a Turbo
 

Sounds like you need to do a lot more reading before you attempt an install. The FAQ's are a good place to start.

Re: Install of a Turbo
 

read the stickies please ;)

Re: Install of a Turbo
 

do not install a fmu on a b16 let alone any motor.

Re: Install of a Turbo
 

Quick!!! read the FAQ before someone flames you. ;)

Re: Install of a Turbo
 

Re: Install of a Turbo
 

You are not worthy of a turbo!!!!! ;D Go supercharger you'll be able to get like 900 hp on 10 psi. Trust me, I know that you know this, you know?

Re: Install of a Turbo
 

Be funny if he did follow your advice. Last time i told a guy who started to boost, to run 15 psi on stock internals with no management. He actually listen to my advice and did it. Before you know it. Boom! And i was just kidding too. ;)

Re: Install of a Turbo
 

good learning source.
http://www.beesandgoats.com/boostfaq/g2icturbo.html

Re: Install of a Turbo
 

yeah someone should make a post in the faq that says "you can use an fmu but if you do you will get no help from anyone here because there are way tomany people that have chipped ecus cheaper than you can buy an fmu" or something along those lines

Re: Install of a Turbo
 

FAQ's own joo

Re: Install of a Turbo
 

you should consider picking up some DSM injecters, your stockers arnt gonna hold up to long

Re: Install of a Turbo
 

thx for the help guys...i know how to hook one up just not connect the oil lines and vaccum llines...

Re: Install of a Turbo
 

i aint a ------ ricer ok??? i know my ----...i have just never cared for turbo and i now i everyone is doin it..i'd like to try it..u know kinda like when your in HS and someone says "Yo d00d u wanna smoke a hooter" and your "Sure never tried that"