Inline install
 

Ok I know where to tap into for fuel on my inline pump. But where do most of you get the power from? The ign.,or at the stock intank fuel pump relay? I was just wondering? Thanks. This is for a 92 CIvic BTW. ;)

Re:Inline install
 

Nobody is running a Inline?

Re:Inline install
 

i can't rememebr where i heard this but i think putting it as close to the tank as possible is the best, somewhere along the frame is where i saw hp tv put one. just cut the lines and put the pump inline with the lines.. :)

Re:Inline install
 

I've not seen anyone run an inline. They have just always opted for the in-tank.

Anyway.. I'll be installing my Walbro 255lph soon.. very soon. Just too cold to drop the tank right now. ;D

Re:Inline install
 

Well this is to run my FMU..SO I will be installing the inline proably between the filter and rail..I will also just wire it up to the stock fuel pump realy. ;D

Re:Inline install
 

i ran my friends inline to the ign2 line. so it came on when the turbo time turned on and turned off when the timer turned off. it's been about 6-7 months since i did this and seem to be runing fine.