injectors???
what injectors from other vehicles fit a d16y8 rail? i just want to run low boost on a standard block
|
You can run DSM injectors. Blue tops with a resistor box and if you have a 96 or newer civic, you may need to buy the injector clips too. Word
|
rx7 injectors and dsm black tops work too
|
Are you being limited by funds? If not, I would suggest some RC 440's or something like that.. just an idea.
|
funds is the problem i just want it boosted on he cheap for the moment then as i get more money i will upgrade
|
dsm 450cc is the way to go if your looking for ~300hp no point in going expensive unless you want some 650cc or bigger
|
could i run standard injectors and run low boost like 6psi for a while?
|
Originally Posted by leitchey
(Post 1275398)
could i run standard injectors and run low boost like 6psi for a while?
|
Originally Posted by turbof22a
(Post 1275406)
with an fmu and missing link, but at that point you might as well spend 150 and get 450cc injectors and a chipped ecu so there is no point in doing that.
thats wat im doin, the dsm 450's fit fine! im usin a y8 head complete on my setup jus gotta cut/modify the seals and switch harness clips if ur car is 96+ |
whats he best place to get a set of dsm's? as i am from northen ireland
|
you can try any dsm forum in the USA i am not sure what any are but just google it
|
All times are GMT -5. The time now is 10:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands