injector wiring question..... electricians please :)
 

hello everybody....

i'm going NA for a while until i will get my turbo back from the rebuild...

i have kind of a problam... i used dsm 450cc inj + clips and inline resistors + safc.

now... i need to reinstall the stock 240's... but i still have the clips and resistors on the wires...

here is a question for the electricians among us:

lets say i will solder the stock clip "before" the resistor. will it still resist?


like this:
http://img314.imageshack.us/img314/9...apimage1mb.png

THANKS :thumbup: :thumbup: :thumbup: :thumbup:

Re: injector wiring question..... electricians please :)
 

the resistors wont affect if nothing is connected to the dsm injector clip...
the pins on the dsm clip are not touching so the circuit over the resistor doesnt complete snd no current is passing through it

Re: injector wiring question..... electricians please :)
 

I'm not an electrician but it doesn't take an electrician to tell you that it won't resist if you connect before the restrictor. the restrictor restricts cause it's inbetween a connection aslong as you make another connection before the restrictor and not inbetween then it won't restrict.

Re: injector wiring question..... electricians please :)
 

What's your fuel management...if you have...or get...Uberdata. You could just recalibrate for the 450's

Re: injector wiring question..... electricians please :)
 

I have some n/a dsm injectors you could plug in and use. just zero out the afc. $5 see my for sale thread