injector size????
 

i have a ek civic 1.5 running 7psi max if i run a afc hack what injector size should i be using and any ideas of where to get them would b great

you'll need 370cc or 450cc from a dsm..440cc from 7Mgte or rb26.

depends on your hp goals. 350cc injectors will be good for 200 crank hp which should be more than enough for your low boost application.

ok thanks for your help fink im guna try 350cc injectors as 200 c hp sounds gud 2 me :D

i have a set of accell 32 lbs(340cc) high impedance injectors with the bosch style connector. new in the box. 110.00 shipped.

make sure you raise fuel pressure at a 1:1 ratio with boost(every 1 psi boost will raise fuel pressure 1 psi). these injectors will work great with this setup.

SOUNDS GOOD, I AM CURRENTLY LOOKIN AT BUYING A CHIPED OBD1 ECU, WOULD THESE 340CC INJECTORS WORK ON THIS ECU OK, WOULD I NEED ANY ADDITIONAL ITEMS?

ALSO YOU SAY MAKE SURE I RAISE FUEL PRESSURE... WELL I HAVE A FSE PRESSURE REGULATOR WOULD THIS B GOOD ENOUGH FOR THE INJECTORS??

yes. thats a nice fuel pressure regulator. i think its a 1:1. if your stock injectors are high impedence and use the bosch style connector then these will work.