injector pindle cracked
The used DSM 390cc injectors I bought just came in...on one injector the pindle is cracked.
Can I fix the pindle by "carefully" gluing it? Or should I look for a new pindle? How bad is it to run it w/o a pindle? Thanks Curtis |
Re:injector pindle cracked
The protective cap on the bottom? if it has a crack dont worry about it, if its loose and may get sucked down the intake just take it off.
Jeff |
Re:injector pindle cracked
Thx Jeff, so yer saying that if I just take the pintle cap (protective cap) off that one there shouldn't be any problems with the flow/spray? If so that's a relief, I couldn't find any place selling pintle caps. |
Re:injector pindle cracked
They just protect if carbon builds up on the tip, they work fine without them dude.
|
Re:injector pindle cracked
Just get the replacement caps from an Injector service shop, they're rare but they're around. I had 2 injectors with broken Pintle caps that I had RC Engineering replace for $1.25 each.
|
Re:injector pindle cracked
pintle caps also protect the pintle from being fucked if you drop the injector.
|
All times are GMT -5. The time now is 05:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands