I'm on the Home Stretch guys! help me find cheap parts to finish my build plzzzz
 

I have a 92 Civic CX, with a 96 B18B1 in it right now, Just snapped off a 15.6 1/4th, and its time to boost it!!!



What I have so far:
Walbro 255lph Fuel pump
Spare ECU to send in to be chipped
Boost Gauge
Oil Pressure Gauge
AEM UEGO Wide-Band O2 sensor/gauge
T3 .48/60 Turbo
Intercooler
Intercooler piping
DSM BOV
Turbo Mani
Adjustable FPR
Resistor box
Fuel pressure gauge

What I already know where to order:
Moates chip burner ($55 from a buddy)
Get my spare ECU shipped from Xenoncron

What I NEED:
DSM 450's
Oil line feed and drain kit
Wastegate? (don't think my T3 comes internally gated)
Money to pay for it all!!!

Any/all help, cheap deals, links to cheap stuff, etc, would be VERY much appreciated!!!

Re: I'm on the Home Stretch guys! help me find cheap parts to finish my build plzzzz
 

Wrong section.

Re: I'm on the Home Stretch guys! help me find cheap parts to finish my build pl
 

If you're really short on $$$ I'd strongly suggest looking at junkyards for the injectors but usually a hit and miss.

As for an oil feed line, others have made them out of solid brake lines from napa. I don't know how much the line is to run, but it shouldn't be no more than 20 or so.

Re: I'm on the Home Stretch guys! help me find cheap parts to finish my build plzzzz
 

Its not exactly a "want to buy thread"

its more of a "want to find" as in if someone knows where I can find cheap parts like now if that makes sense? :8

Re: I'm on the Home Stretch guys! help me find cheap parts to finish my build pl
 

Yea, my junkyards are all wiped out, and I had a set a while back, but sold them before I decided to boost :(

I'll have to take a look at Napa though.

Re: I'm on the Home Stretch guys! help me find cheap parts to finish my build plzzzz
 

I got some injectors if you need them but they arent 450's

I got a set of universal 375's and a set of 390's with resistor box if you need them. PM me and lemme know.

Re: I'm on the Home Stretch guys! help me find cheap parts to finish my build plzzzz
 

^^^^ There you go, and oil feed line, you can use brake line

Re: I'm on the Home Stretch guys! help me find cheap parts to finish my build plzzzz
 

Brake line works really good. It's super cheap too.

Re: I'm on the Home Stretch guys! help me find cheap parts to finish my build plzzzz
 

I used the feed line for a mechanical oil pressure gauge had no problems. Got the line at napa for $10 I think (metal line not the plastic ----)

Re: I'm on the Home Stretch guys! help me find cheap parts to finish my build pl