HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   if you care...... (https://www.homemadeturbo.com/forced-induction-7/if-you-care-78877/)

Dx 101 06-07-2007 04:56 PM

if you care......
 
long story short but i came into some money so im finally doin it up. been collecting parts for years never doiung anything with them other than trading and selling and now its time to put them together.

what i have : hf mani, t25 w/ wastegate, dsm bov, fmic, charge pipes,taped oil pan
what i need : 2.5 couplers w/ clamps, bov flange, injectors, throttle body, clutch/flywheel, 2.5-2.0 reducer, 2.5 flex pipe, pipes for dp

what else i would liek is to throw lsd in but its a dx coupe and this is more my test project and will end up sellin it when my prelude is road ready also is it worth getting a new fuel rail and feul pump? rail would most likely b an ebay pos im only lookin to put down maybe 200whp but thats pushin it more realistically lik 170-180whp.i have a stock gsr with less that 30k on it. would that b ok. is it worth filling? always wanted to. if i pop it open is it worth building? with all the great deals on here i can get some pistons rods block filler and everything else cheap. im lookin to spend anoither 1000 on finishing parts. NEED FEED BACK
if xencron is still tunin thats who i was going to call. i have access to a few shops here in ct so it will b done hmt style but nice and neat. its been a while since ive been on here but im back ill have pics a such on later. let me know what you guys think any imput is great

WTF 06-08-2007 05:57 AM

Re: if you care......
 
your shootin for 180-200whp on a gsr turbo? WHOA THERE TAKE IT EASY

imburne 06-08-2007 06:17 AM

Re: if you care......
 
Realistically your looking at 120 wheel horse power with that setup. :1

Seriously you have been here that long and your asking something like that? Yeah its worth building.. Bottom line is you need to do research and add what you think you will need. You know that nigga.


idiot-stick 06-08-2007 09:00 AM

Re: if you care......
 
t25 too small. Do a 14b at least. gah

E-b0la 06-08-2007 09:40 AM

Re: if you care......
 
T3 60 trim minimum. 180 HP is what a GSR makes STOCK.

Tom-Guy 06-08-2007 09:44 AM

Re: if you care......
 

Originally Posted by imburne
Realistically your looking at 120 wheel horse power with that setup. :1

Yah. You bolt a T25 to an engine that makes 151 whp stock and you end up netting 120 whp. T25 suck on anything bigger than a 500cc V-twin motorcycle engine - 2G DSM, perfect example. GSR would be limited by a .60 T3 if you wanted more than 225-ish, those engines really want a .57 trim T3/T04E w/ stage 3 .63 AR turbine housing. :y


Originally Posted by Dx 101
long story short but i came into some money so im finally doin it up. been collecting parts for years never doiung anything with them other than trading and selling and now its time to put them together.

what i have : hf mani, t25 w/ wastegate, dsm bov, fmic, charge pipes,taped oil pan
what i need : 2.5 couplers w/ clamps, bov flange, injectors, throttle body, clutch/flywheel, 2.5-2.0 reducer, 2.5 flex pipe, pipes for dp

what else i would liek is to throw lsd in but its a dx coupe and this is more my test project and will end up sellin it when my prelude is road ready also is it worth getting a new fuel rail and feul pump? rail would most likely b an ebay pos im only lookin to put down maybe 200whp but thats pushin it more realistically lik 170-180whp.i have a stock gsr with less that 30k on it. would that b ok. is it worth filling? always wanted to. if i pop it open is it worth building? with all the great deals on here i can get some pistons rods block filler and everything else cheap. im lookin to spend anoither 1000 on finishing parts. NEED FEED BACK
if xencron is still tunin thats who i was going to call. i have access to a few shops here in ct so it will b done hmt style but nice and neat. its been a while since ive been on here but im back ill have pics a such on later. let me know what you guys think any imput is great

Fuel rail and pump are not needed. Stock fuel lines are good for 500 whp. Stock pump with stock wiring is good to 225-250, stock pump with upgraded wiring is good for 300-325, Walbro 255 are good for 350-600 depending on the quality of your wiring.

Leave the engine stock. Stock GSR are known reliable at 300-350 whp, with good tuning and a driver that doesn't abuse the car.

You will not fit a HF manifold onto a B-series anytime soon. Get a sweet CDM cast mani from Donald125.

You're in CT? Whatever you do, bro, don't get anything from CTP/CC-Fab unless you like herpes.






Dx 101 06-08-2007 12:57 PM

Re: if you care......
 
gsr? this is going on a d series. right now its non vtec might build and swap a z6 . but where my main ? is and should have been if you guys have some turbo ---- layin around and came into some money (like i said about a G going in to it)what kind of extras do you think you should buy.

so if the t25 isnt going to cut it i also have to t3s that i was going to use when i had a gsr. one is from i think a ford? but i have no clue its a .42/.63 wiht internal wastegate. and the other is i believe off a crysler its got that goofy weird foot print but has been redrilled to a reg t3. the only reaason why i didnt want to use these was because im using an hf maniand need an internal wg and i figured the .42//63 woudl b way to big on a d. and the crysler one didnt have a wg and the wg that i have doesnt fit it so thats why i chose the t25 w w/g.
and if what your sayin is that what i have might get me near were i want to b would it then b worth it to spend a lil money on buildin. tt has everything for like $730 egay has full ---- for about that same. so im torn throw my crap on and hope it doesnt blow or spend a lil and get a lot?

Tom-Guy 06-08-2007 01:00 PM

Re: if you care......
 

Originally Posted by Dx 101
i have a stock gsr with less that 30k on it. would that b ok. is it worth filling? always wanted to. if i pop it open is it worth building?

I am confused.

MAJORAHOLE 06-08-2007 01:09 PM

Re: if you care......
 

Originally Posted by Joseph Davis
I am confused.

no ----, wtf?

Hitchhikkr 06-08-2007 03:32 PM

Re: if you care......
 
Dx 101...YOU posted this back in like feb or something.

"there is this wonderful thing called searching and reading. everything is here esp your last ? just search and read and then ask. and dont say u did cuz then u wouldnt be asking these ?s"


Thou shalt heed thy own advice I think.


All times are GMT -5. The time now is 02:01 AM.


© 2024 MH Sub I, LLC dba Internet Brands