if i use check valves and 390 injectors, will it be suffient enough?
 

if i use 390 injuectors, ic, and check valves, and back timing down will my car run suffient on 5 psi of boost.....just wondering? i might decide to do that while i wait for z dyne...cant wait any longer, going insane want to boost so bad... >:( >:(

Re:if i use check valves and 390 injectors, will it be suffient enough?
 

Good lord, 390s? My brother's car (4A-GZE) is using 365s and is running fine at around 10psi. How big is your engine?

Re:if i use check valves and 390 injectors, will it be suffient enough?
 

it is a 1.6l honda d16a6....i was just wondering if check valves and 390 inj...would hold good enough for 5psi of boost? nothing else..and ic..

Re:if i use check valves and 390 injectors, will it be suffient enough?
 

If you use bigger injectors you'll need something to control the fuel dump. You'd probably run a bit rich if you just drop the injectors in.

The combo for injectors is normally "larger injectors + AFC || SMC"..

Re:if i use check valves and 390 injectors, will it be suffient enough?
 

For 5 psi just run your stock innjectors and checkvalves.
It wil be enough for 5 psi did it a few times though.
And my engine didn't blow up.

Re:if i use check valves and 390 injectors, will it be suffient enough?
 

For 5psi that is a bit overkill, the 390cc injectors are to way large for the stock ecu to controll, you will need a device to pulse them slower (afc/hack/smc/fields)

Jeff

Re:if i use check valves and 390 injectors, will it be suffient enough?
 

390's are a bit too much.
Possibly 310's?

Re:if i use check valves and 390 injectors, will it be suffient enough?
 

Thats funnt I was going to run DSM 450s in my 1.5L civic, but now they are going in the Stealth R/T, I'll have some 360cc injectors avaliable after I put the R/T back together...