sup guys..

ok... i checked the continuacy from each yellow/black wire on the injectors to the harness.

so do i need to wire it like this?
4 black wires from the resistor box solderd togather to the engine side wire, and the red wire to solderd to the firewall side wire??


thx :thumbup:

 

do you have the other side of the green resistor plug? or another that fits? if so you dont have to cut the harnesses.

 

 

i dont get it... check out my connector thats on the tower, i dont have alot of wires like you have

somone on H-t said that there is a chance that the connector is under the intake manifold, could it be?

thanks.

 

If you checked for continuity than it's right. Cut the wires and hook the 4 black to the wires going to the injectors, twist the remaining 4 that goes to the harness together and hook them up to the red.

 

thats my problam... that i only found one wire on this connector that has continuity from all the injectors. (this is the only connector that i have on this tower)



i took a picture of the connector that i found under the intake manifold as the H-T member said.

this is it tell me what you think....

 

that looks like the clip, does it have yeloow/black wires on the other side?

 

just try and start the damn thing up. if it doesn't start you have it backwards.

 

ya if you have a 96+ then the power distribution plug is under the mani. check those wires to the plugs.