i need a manifold..please help
 

hey everyone..im building a turbo kit homemade style for my 1999 civic Si. I am using a IHI RHB5 turbo, well i need a log style manifold that i can keep my A/C. I am thinking about building my own manifold, but i can't seem to find materials so i would much rather buy one from someone on homemadeturbo.com, I have read alot of the guys on here build them. so if anyone can build me a manifold that is A/C ok please contact me.ethier by PM or my email at anothercivcSi@aol.com BTW is 8 psi ok with a FMU and high pressure fuel pump..i think the RHB5 is set at 8 psi stock. thank you

Re:i need a manifold..please help
 

First off, since you are "WTB" something, you should be posting this in the classified section..

Secondly, a IHI RHb5 turbo is way to small for a b16a, and if someone does make the log manifold for you, be sure to specify if its a tri flanges or normal 4 bolt flange.

Jeff

Re:i need a manifold..please help
 

An RHB5 is too small for a corolla...... Get a bigger turbo, I'm talkin' t3/t4 hybrid.

Re:i need a manifold..please help
 

Im building manifolds right now. You are about 30 back, but I can do it for you for $250....
I just need a flange gasket because Im set up for T3 and T4 flanges only...
-Cody

Re:i need a manifold..please help
 

I'd buy the Greddy kit if I were you....you can keep the A/C (it's not a log manifold)and you get a nice sized turbo (18G) and fuel management...

Re:i need a manifold..please help
 

the greddy kit is a waste of money...as are basically all kits

Re:i need a manifold..please help
 

I can make you a manifold machined from solid steel using the latest in CAD CAM design. The manifold will set you back about $350 and it makes everything else look like it came from the stone age. The manifold comes with a lifetime warranty cos you would need a direct strike from a nuke to damage it and I can ceramic coat it for another $20. I can also machine it from stainless if you prefer. You can email me at my website at www.steedspeed.com