I need a diaphram(sp) for wiring up a resistor box for an OBD1 car
 

I need one since i now have an EG coupe and it doesnt come with a resistor box. I went and got one from pull a part for free(pocketed that bitch). And, I have a friend thats gonna wire it up and make it look like it was there from the factory. Where can I find a link on how to do it, with the box and not the inline resistors.

Give me a link if possible.

Re: I need a diaphram(sp) for wiring up a resistor box for an OBD1 car
 

it cant look likr it came from the factory if it never came in that car

Re: I need a diaphram(sp) for wiring up a resistor box for an OBD1 car
 

Thats one reason you wont get a DIAGRAM! Thieving is looked down upon here. :l

The other is that no such factory diagram exists.
You might get an MS paint one though.....

Re: I need a diaphram(sp) for wiring up a resistor box for an OBD1 car
 

here's my old 95 coupe installed:
[IMG width=640 height=480]http://img73.exs.cx/img73/1375/p62901238xo.jpg[/img]
[IMG width=640 height=480]http://img73.exs.cx/img73/1573/p62901241cg.jpg[/img]

If you get the grey plug resistor box, it will look even better.

Re: I need a diaphram(sp) for wiring up a resistor box for an OBD1 car
 

Here's a grey plug on the Integra
http://img443.imageshack.us/img443/4...0161jp0.th.jpg
http://img440.imageshack.us/img440/9...0160jd7.th.jpg

Re: I need a diaphram(sp) for wiring up a resistor box for an OBD1 car
 

I really meant like can someone give me the directions on gettin it to work , so i can tell my friend how to do it. Anyone tell me the step by step or tell me where to find out how to wire it up.

Re: I need a diaphram(sp) for wiring up a resistor box for an OBD1 car
 

piece of ---- thief.

Re: I need a diaphram(sp) for wiring up a resistor box for an OBD1 car
 

i dont want to type it up so here is a good link. bottom of page. basically reverse of what it says. hook up the power to the respective spot on the resistor box and other 4 wires from resistor box goes to injectors.


http://www.rywire.com/store/images/i...0to1jumper.gif

Re: I need a diaphram(sp) for wiring up a resistor box for an OBD1 car
 

Did you mean Diagram?

Re: I need a diaphram(sp) for wiring up a resistor box for an OBD1 car
 

Or Diaphragm? http://familydoctor.org/online/famdo...ptive/806.html