I found the bst slicks for my setup
 

On my 22x8x13´s slicks I ran 11.91 at 119 mph, but spinning on 1st and 2nd.

On 24.5x9x13 I ran 12.0 at 112 mph

The best combo for me:

11.78 with 23x8x13 mh slicks

Re: I found the bst slicks for my setup
 

ok

Re: I found the bst slicks for my setup
 

what does this have to do with a forced induction?

Re: I found the bst slicks for my setup
 

forget it

Re: I found the bst slicks for my setup
 

ok

Re: I found the bst slicks for my setup
 

ok

Re: I found the bst slicks for my setup
 

already have

Re: I found the bst slicks for my setup
 

forget what?
http://www.hackerpimps.com/towlie.gif

Re: I found the bst slicks for my setup
 

how much whp?

Re: I found the bst slicks for my setup
 

MPH ?

Re: I found the bst slicks for my setup
 

11.78 at 117 mph

Re: I found the bst slicks for my setup
 

Hot

Re: I found the bst slicks for my setup
 

The gearing/rpm range of the d series motors like smaller slicks. I have found on the simple 13 sec hmt builds 20 inch slicks work well. Move up to 200+whp range 22-23 tires work well.

Re: I found the bst slicks for my setup
 

yea my 25's with 300hp were horrible at the track, crosssing the traps barely into 3rd :1. i need some 23's.

Re: I found the bst slicks for my setup
 

The gearing of the d transmission is not helping. Look at what the all motor cars run with 260+whp all 24.5 inch tires. I think bisi runs a 27 inch tire.

Re: I found the bst slicks for my setup
 

yea its a DX trans too, it still hard to launch without antilag with these things

Re: I found the bst slicks for my setup
 

More that 260 whp :)

That and a 5:1 FD in the CG tranny :)

Re: I found the bst slicks for my setup
 

WE will see how the cg transmission feels on boost that will be a first for me. last time I rode in a car with a cg trans was my buddies old carbed zc in 86 civic si with old web regrinds. It was fun. Not bad for what it was. I remember the old 3rd gen article I think katman wrote about how disappointed he was when he ran the jdm brown valve zc transmission vs the cg.



Im so damn impressed with bisi these days I think everyone is.

Re: I found the bst slicks for my setup
 

The all motor h's I have tuned that were making 260-300 whp we ran 24.5 tire. Gearing seemed to be dead on. Gsr transmission w/ itr fd and spool.

Re: I found the bst slicks for my setup
 

I need to improve my 60 ft´s, once I can get into the 1.65-1.70´s, I´ll be on the mid 11´s.

I´m crossing the line almost at 6000-6200 rpm´s on 4th gear.

if I turn up the boost about 5-7 psi I can be into the low 11´s ???

Re: I found the bst slicks for my setup
 

How were your 60' with all the differant sizes?

Re: I found the bst slicks for my setup
 

witjh the 22x8x13 , my beast was 1.82, spining on 1st.

24.5x9x13 best was 1.72, but my mph was 112 , too much tire for my setup

23x8x13 best of 1.78 at the moment,

Re: I found the bst slicks for my setup
 

Re: I found the bst slicks for my setup
 

I wonder if that ---- works with Free beef tires :1

Re: I found the bst slicks for my setup
 

Hrm, Grape Juice!

Re: I found the bst slicks for my setup
 

Nope only works with the 4 for $100 deal

Re: I found the bst slicks for my setup
 

Thanks for the link Chris, I´ll try to play with my launch control, tire pressure and antilag to find the best spot to improve the 60 fts.

I´m going to Import Invasion this friday,

Re: I found the bst slicks for my setup
 

Are you still on the oem diff?

Re: I found the bst slicks for my setup
 

Nope, OBX LSD I installed.........

Re: I found the bst slicks for my setup
 

Yes Sir, BONESPEC tranny

Re: I found the bst slicks for my setup
 

well i am new here i have a obx lsd how much do u charge to install in the tranny i am in 56201 mn i will ship the obx and i will buy a tranny from u or ship you mind

Re: I found the bst slicks for my setup
 

What suspension are you running?

Re: I found the bst slicks for my setup
 

skunk2 drag coilovers on kyb agx
Z-10 traction bars.

Last night. I ran 11.71, my best time by now.

Re: I found the bst slicks for my setup
 

Vitara motor builds own these days. You really should run one of my 70mm throttle body set ups. YOu should spool alot sooner with it.

Re: I found the bst slicks for my setup
 

I´ll have to port my skunk2 intake manifold to run that 70mm tb, rigth??

Re: I found the bst slicks for my setup
 

Or run a 65mm unit you can get away with not porting with the 65mm units but it is recommend too port match.