Hyundai accent turbo quck pic
3 Attachment(s)
Attachment 33302
Attachment 33303 Attachment 33304 http://i50.photobucket.com/albums/f3...1/DSCF0392.jpg Some of you may remember me posting some pics of my car awhile back when i was boosted with stock internals. Well I since blew that setup up exploding the ringlands on two pistons. So here is a new shot of the engine bay with the new motor. This engine has : port and polished head both intake and exhaust Ford racing 440cc greentop injectors malpassi adjustable rising rate fpr zen lowering springs (not dropped in pic) with gabriel ultra struts filled motor mounts with windowweld, to cheap to buy polyurethane mounts shot peened rods rebalanced crank Tiburon Throttle body/ecu/mass air flow sensor msd 8.5mm plugwires denso iridium plugs unorthodox crank pulley low compression 7.5:1 pistons milled deck to raise compression to 8:1 innovate wideband tuned with emanage hks bov, 2.75inch piping, fmic, apexi avc-r boost controller.... Im sure theres more but nothing comes to mind at the moment. The turbo really sucks its a t15, yes its smaller than a t25. Im running the turbo at its max boost of 14psi and i need tons more! Soon i will have some dyno #'s though and these cars are known for massive torque #'s, not hp. Im looking to pick up a gt28rs I believe it was, with the .60 .63 a/r. Also soon to come is water/meth injection system and im currently looking to fit a tiburon transmission in the car. |
Re: Hyundai accent turbo quck pic
video request
|
Re: Hyundai accent turbo quck pic
http://s50.photobucket.com/albums/f3...t=DSCF0582.flv
<embed width="352" height="308" type="application/x-shockwave-flash" src="http://vid50.photobucket.com/player.....flv"></embed> http://i50.photobucket.com/albums/f3...h_DSCF0582.jpg Dunno if that video works, it kinda sucks though sorry guys. Im out of town right in kansas on my cousins laptop. My car is in orlando florida so I'll get some videos when I get back. At the moment im in need of a clutch since mine is going out. I will order that when I get back home... Btw the motor is a 1.5sohc and the exhaust is open downpipe (has been since day one). Im to cheap to put put exhaust on it knowing i got to switch turbos then have to do the exhaust again.... O I also have a video of my running a 06 mazda v6 if I can find it in my email somewhere. I toasted it with a slipping clutch ;-) |
Re: Hyundai accent turbo quck pic
better footage...do some runs or something :6
|
Re: Hyundai accent turbo quck pic
Nice.I love the different cars you never think of.Go rape some mad tyte vtec racers :y
|
Re: Hyundai accent turbo quck pic
nice work man....nice to see a none honda on here for a change :y....... piece of ---- hondas :3 Hyundai r gay too.
|
Re: Hyundai accent turbo quck pic
top effort dude
me likey :) |
Re: Hyundai accent turbo quck pic
Thanks guys. Im heading back home today gotta catch my plane in a few hours. I'll try to get a few high videos by the end of this weekend. I'll just have to weed out the ones where the clutch slips :S
|
Re: Hyundai accent turbo quck pic
that RAPE Hondas. hahaha good work tho.
|
Re: Hyundai accent turbo quck pic
I guess it all depends on the Honda lol I've never dyno'd my setup but these 1.5's have an average of about 160+ ft lbs of turque @6psi. Most people dont push past 10psi, I only pushed 11psi on stock internals until I blew it. With that 160+ torque the hp is only about 115-125. Only dyno chart I ever seen of the 1.5 was stock internals pushing about 170hp with 230+ torque. Im so anxious to get on a dyno but my clutch cant hold the torque at the moment so thats on hold =-(
|
All times are GMT -5. The time now is 01:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands