HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Hows this intercooler look for a for a B18b civic (https://www.homemadeturbo.com/forced-induction-7/hows-intercooler-look-b18b-civic-79969/)

turbo dave 07-08-2007 11:02 PM

Hows this intercooler look for a for a B18b civic
 
2 Attachment(s)
i traded a legend lip for it :o. Also going to be running a garret t3. do you think this is big enough its 8 x 24 inches.

Attachment 25913




and the car its going in.
Attachment 25914

sikcrx89 07-08-2007 11:20 PM

Re: Hows this intercooler look for a for a B18b civic
 
look like a jrc.. it will do fine.

fe3tcourier 07-09-2007 05:58 AM

Re: Hows this intercooler look for a for a B18b civic
 
looks small to me, i'd be worried about pressure drop. if you are only running small psi though, it will be sweet as the airflow wont be huge through it anyway.

fred.

USS 07-09-2007 12:39 PM

Re: Hows this intercooler look for a for a B18b civic
 

Originally Posted by fe3tcourier
looks small to me, i'd be worried about pressure drop. if you are only running small psi though, it will be sweet as the airflow wont be huge through it anyway.

fred.

Die in a fire.

HondaTuner 07-09-2007 12:56 PM

Re: Hows this intercooler look for a for a B18b civic
 

Originally Posted by Snafubmx234
Die in a fire.

:y

If you think it's too small just sell it to me :P

fe3tcourier 07-09-2007 02:21 PM

Re: Hows this intercooler look for a for a B18b civic
 

Originally Posted by Snafubmx234
Die in a fire.

is toluene fueled ok? loser....

does he want an optimal solution, or just one thats a little better than passing it straight to the intake through a straight pipe hanging out the front.

the author of the thread, not some post ----- numb nuts could decide what his goals are and whether this piece of kit is well suited to it.

fred.

ososlohatch 07-09-2007 02:36 PM

Re: Hows this intercooler look for a for a B18b civic
 

Originally Posted by fe3tcourier
is toluene fueled ok? loser....

does he want an optimal solution, or just one thats a little better than passing it straight to the intake through a straight pipe hanging out the front.

the author of the thread, not some post ----- numb nuts could decide what his goals are and whether this piece of kit is well suited to it.

fred.

judging by the looks of his car and engine bay, its a stock motor and his prolly going to run 10 pounds on a t3 that ic is good for 300whp

accordepicenter 07-09-2007 02:58 PM

Re: Hows this intercooler look for a for a B18b civic
 

Originally Posted by ososlohatch
judging by the looks of his car and engine bay, its a stock motor and his prolly going to run 10 pounds on a t3 that ic is good for 300whp

exactly. Should do good in a setup like that

turbo dave 07-10-2007 10:52 PM

Re: Hows this intercooler look for a for a B18b civic
 

Originally Posted by ososlohatch
judging by the looks of his car and engine bay, its a stock motor and his prolly going to run 10 pounds on a t3 that ic is good for 300whp

yes its a completely stock motor and yes 10 psi will be plenty i was looking for high single digits, 8 or 9 psi. i want mostly want a stock daily driver with some highway beef.



Originally Posted by accordepicenter
exactly. Should do good in a setup like that

ok thanks my friend was saying it was too small for his gs-t which is .2 liters bigger so i wasnt sure, then again hes running 15 pounds on a 16g

it costs me 10 bucks total anyways.

Ravage70 07-11-2007 12:36 AM

Re: Hows this intercooler look for a for a B18b civic
 
oh baby the jrc coolers are still roaming the earth


All times are GMT -5. The time now is 04:36 PM.


© 2024 MH Sub I, LLC dba Internet Brands