how much power is a 14b capable of
I sold my t3/t04e this weekend, it would spool to slow and was just to big for my d15b7, I am looking for somthing cheap (14b) but still want to make 200whp, so my question is, is it possible to make 200 whp with a 14b on a d15b7. I see a few of you are using the 14b, could you please post your motor and what kind of power you are making. I already have 450's, chipped ecu installed.
|
Re: how much power is a 14b capable of
i made 255 with a 14b at 16psi at 12psi most guys see 210-230 on a z6 so you should see 190-200 on a b7 with a a6 cam upgrade well worth it.
|
Re: how much power is a 14b capable of
Thanks for the reply, i dont think i will be swapping cams, unless i can get one for cheap. where is the best place to get a 14b? all the junkyards in my area have been cleaned out :'(
|
Re: how much power is a 14b capable of
ebay or DSMtrader.com or here or turbod16.com or honda-tech.com
|
Re: how much power is a 14b capable of
14b z6 11psi 210 whp
|
Re: how much power is a 14b capable of
Well I need to know the same answer but for a B18C1 in a 96 DX, I plan to drop the compression to 9.0:1 and plan to push slightly over 300whp. Would the Laser/Talon/Eclipse 14B (T04?) turbo then work? And at what PSI?
And does it BY CHANCE have water cooled parts? Please don't flame i'm trying to learn and it's so confusing! :S Edit: I think i'm actually going to go with the T3/T04B .63 A/R instead, i'm pretty sure even with the low compression it should still kick out 300ish |
Re: how much power is a 14b capable of
14b's are good to 275 or around there. For 300hp I would look at something bigger, like a T3.
|
Re: how much power is a 14b capable of
14b is pushing it , my buddy has a 16g on his z6 and it went 13.6
runs pretty good. |
Re: how much power is a 14b capable of
Originally Posted by BlueBoostedSiHatch
Well I need to know the same answer but for a B18C1 in a 96 DX, I plan to drop the compression to 9.0:1 and plan to push slightly over 300whp. Would the Laser/Talon/Eclipse 14B (T04?) turbo then work? And at what PSI?
And does it BY CHANCE have water cooled parts? Please don't flame i'm trying to learn and it's so confusing! :S Edit: I think i'm actually going to go with the T3/T04B .63 A/R instead, i'm pretty sure even with the low compression it should still kick out 300ish |
All times are GMT -5. The time now is 06:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands