How do you use this thing??? HELP
 

Ok so my car been running like ass ever since i've put the turbo on and i've tried lot's of different things and none of them helped... so i am thinking now that maybe my resistor box is not wired in right, so i am trying to find the right wires that run from the injectors... here i found this ---- on honda tech...

http://home.comcast.net/~dimchik230/resit.JPG

so i went out and bought this multimiter... but how the ---- do you use it to find the right wires?

http://home.comcast.net/~dimchik230/S2010157.JPG

Re:How do you use this thing??? HELP
 

read the intsructions ...its that lil folded up piece of paper in the box with words all over it :P

Re:How do you use this thing??? HELP
 

i did and it didn't help... i guess the manufacturer expects you to at least know basic ----, and i've never used multimiter before so i don't even know where to begin... :-\

Re:How do you use this thing??? HELP
 

well what you try'n to do ..it does multiple uses ;)

Re:How do you use this thing??? HELP
 

i described above what i am tring to do ;)

Re:How do you use this thing??? HELP
 

Set the meter on Ohms, any ohm setting will be fine. The reading on the meter should be "1", for 100% resistance, and if you touch the terminals together it should go down to (close to) 0, meaning no resistance. This is how you figure out which wires belong to each other.

Re:How do you use this thing??? HELP
 

I had no clue what I was doing with one of those either, I just tried different settings. Finally I got it to read from 0 to 1 by touching the prongs together. I assumed this to be continuity and my injectors work fine. :P

edit- damn Will you type fast

Re:How do you use this thing??? HELP
 

cool... i got this thing figured out and problem that i had for many months is iliminated... ----... my car is so much faster now :D