How do you install things such as, boost gauge, BOV, wastegate, manual boost controller, stuff like that. Where do all vacuum hoses and stuff go? Not the turbo, I can figues that stuff out myself. where can i get fittings for wastegate and oil feed fittings into the turbo, can't seem to find small ones at LOWES.

the install websites dont tell these things, or maybe i just hate reading

 

For a vacuum source you can tap the brake booster and use a vacuum mani to keep it clean.For the boost controller you just put it in between your wastegate and vac source for wg.

 

before the flaming start..
here u go.
https://www.homemadeturbo.com/forum/...;threadid=3921

 

^^^^ there is a link for a write up on how to do everything, just look throught them.

 

read and study it first b4 you start the whole thing.....i think the hardest part of it is installing your oil feed lines. meake sure they are snug but not to tight or you can break the threaded fitting and youll have a head ache then if you cant get it out...just take your time....its pretty self explanitory.

gerald

 

i thought the hardest part is tuning it or getting it to run correctly...

 

tap into the brake booster. the brake booster goes into the big end, and the rest to your sources..
https://www.homemadeturbo.com/forum/...threadid=26343

 

wrong, boost controller goes on top nipple. constant vacuum goes on bottom nipple.

check out this thread : http://www.honda-tech.com/zerothread?id=635014