can someone tell me how to hook up a vortech fmu. i got the blue vortech 10.1 fmu. i bought it brand new, but it didn't come with intructions.i got a 95 hond accord. by looking at the fmu, i think it goes right at the fuel pressure regulator, i'm just not 100% sure. thanx for the help. i payed 160 for bran new. is it too much?

 

edit: retracted cause i'm a dick and didn't think to check where doc's link went.

 

every fmu ive seen was the same (as long as it wasnt adjustable, which yours isnt, so)... the nipple on top goes to a vac. source. like the line going to your fpr is usually a prime one to go off of. just T into that. then theres 2 nipples on the bottom of the fmu. find your fuel return line. cut it. run the end comming off your fuel rail into the "in" nipple and then run the other part of the line you just cut...(this time, the section running back to your tank obviously.) take that line and connect it to the "out" nipple on the bottome of the fmu....thats bout it really...

 

very simple, top nipple is a vaccum source (any will do) There are 2 fittings on the bottom. attack these to the fuel return line comming off the fuel rail. One is an in and one is an out (going to the fuel tank) Follow these steps and you should be fine.

 

God damn it, I moved this thread for a reason. Please post in the right forum. Your other thread is in the correct forum. Thank you.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote